Discussion Locked

Ethernet port failed to connect

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Recently, after a storm my desktop computer ethernet connection to the router (SMC) and internet failed. I could not talk to the router to check the configuration. When I connect another computer to the cable, it was able to function normally. That left my desktop ethernet port being the culprit. When I checked Device Manager, it reported that the network card is enabled and working properly !
I am considering installing a wireless card or a USB wireless device to access the router.

Can anyone tell me if this is a hardware or a software(configuration) issue? How do I check this?

My computer: HP Pavilion a600n/XP Home SP2

Thanks,
Tim Hoang

1 reply

by nicknielsen

Verify your software configuration by opening a terminal window (Start | Run, Enter "cmd" and press enter). At the prompt, type "ping 127.0.0.1" If you receive a response, your PC is configured properly and you most likely have a network port failure. Replace your network card.

If you don't receive a response (Request timed out), check your network configuration (Control Panel Network Settings.

Edit: clarify

This discussion is closed to new replies.