9 replies
by omaq
Crossover Ethernet Wiring Configuration
Plug 1: Orange-White Green-White
Plug 2: Orange Green
Plug 3: Green-White Orange-White
Plug 4: Blue Blue
Plug 5: Blue-White Blue-White
Plug 6: Green Orange
Plug 7: Brown-White Brown-White
Plug 8: Brown Brown
by netfleet
by ebob
http://www.faqs.org/faqs/LANs/cabling-faq/
Especially section 12.
by netfleet
by cavedweller
by netfleet
by rileylk
Looking at the RJ45 connector, let the wire hang down and point the side with the tab away from you. From left to right, the cable positions are 1 through 8 with 1 being orange-white and 8 being brown.
Cut the connector off and swap 1 and 3, andswap 6 and 7. The result will be:
1 blue-white
3 orange-white
6 brown-white
7 green
The other 4 you can cut out if it makes puching it down easier. That is the basic transfer/receive swap.
by netfleet
by netfleet
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending