Discussion Locked

Event Viewer

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
In the server I get an error saying "The server received an incorrectly formatted request from ?". Now before I start swaping NICs and changing patch cables is there anything else I could check? Any help would be appreciated.

7 replies

by rraheb

If your server is connected to a WAN then may be someone is trying to hack into your server. Or someone from your LAN is trying to bring your server down. You need to check for this direction also.

Hope this was helpful.

Best Regards,

Rafik El-Raheb.

by nrodriguez

look at the time this is happening. During business hours or after? if during look at the security log and find out how is logging on at the same time. Chances are someone is trying to hack something. same goes for it if it is after hours.

turn logout after 5 attempts on in user manager and then under policies. turn logging on for bad logon attempts in user mgr under audit

the problem will have double entries in the system and application check both for consistent time.

by sfo farmer

Other than a hack- are you or anyone in your company using anything to monitor the server and in particular any services? Look at your event viewer and see if there is a consistent time eg. like every 90 seconds or every 5 minutes. Some monitoring tools will try to open a tcp port (I've seen it when trying to monitor the ports MS SQL run on) and not send any data to the open pipe causing an improperly formated request. Another suggestion is to bring in a protocol anylyzer/sniffer and see where it is coming from and what it is. G'Luck! SFO

This discussion is closed to new replies.