12 replies
by budnelson
by collins_ms
by timber
by collins_ms
by haggis
If you are using both IPX and IP, then you can run these both over Ethernet_ii. You may want to visit client P.C's and optimise/alter them to the ethernet_ii frame type. Also, you can check INETCFG for the method the servers are using to pass route information to each other. Make sure that they are trying to use "NLSP with RIP/SAP compatibility" instead of just RIP/SAP.
Also check any Network Printer devices on the network, ans the frame types being used. They generally default to just about all frame types out of the box. This can become a serious problem in networks with lots of them.
by collins_ms
by rws
Since you are running 4.11 SBE, that tells us that your LAN has 50 or fewer devices and is running IPX/SPX. You mentioned that you used a protocol analyzer to generate a report on your LAN and discovered that you have over 40% network traffic.
I have a couple of questions for you though. Are your Win9x PC configured with File & Printer sharing enabled? If so, turn that off. Make sure the client PC's are only using IPX/SPX and possibly TCP/IP, no NetBEUI.
As to frame type; in a 4.x IPX only environment, you want to use 802.2 and not 802.3. Does your snap server support 802.2? If so, use that frame type instead of 802.3. In a mixed protocol enviroment, you can run both TCP/IP and IPX/SPX on the Ethernet II frame type. Be aware theIPX communications using that frame type can be slower. And check your JetDirects. Configure them for the IPX frame type that you have standardized on and only that frame type. Turn off unneccessary protocols.
Summary
1. Workstations
a. Turn off NetBEUI
b.
by collins_ms
by miller6010
by collins_ms
Turning off 802.2 saved me a lot of traffic.
I found a lot of extra SAP traffic on my 4.11 network & it turned out to be the NT Workstations. If an NT WS ever has the Microsoft Novell client on it, SAP is turned on and can only be turned off by manually adding this to the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc]
"AdvertiseRpcService"="No"
You must leave SAP turned on for Win9x machines (at least with the 2.5 Novell Client) or they will not automatically login, however,they don't continually broadcast the way an NT WS does.
by collins_ms
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending