Discussion Locked

Exmerge not working

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

just installed exchange5.5 onto new machine,new drives everything.
set it up to join site, all is ok.
ported mailboxes over (only a few) ran exmerge and it fails.
The primary server also does not work,and never has. Also i cannot run isinteg either.
the first time i ran it it found errors on db, then server crapped out.
The primary server still has the main boxes on it and thats why i put together another server, to export all boxes to it till i rebuild first one.
Since exmerge doesnt run on this new install with exch SP3 and NT sp5 Did the corrupted db also port anything over ???

4 replies

by mckaytech

There is something fairly serious going on with primary server and I would suggest rather than using a move procedure that requires an intact server, I would use the forklift migration procedure to move the whole Information Store to the new server (procedure can be found on TechNet at article Q199954). Then you can repair the database and get it up and running and then repair the primary server off-line.

To use this procedure, you will have to re-install Exchange and NOT have it join the site but I think it will be time well spent.

paul

by heymoe

a move procedure would not help in this case, as i can port over mailboxes in either senerio, problem lies in what is causing exmerge to not perform even on its own created mailboxes.

by yorkster

What version of exmerge do you have? You should be using the lastest version which I believe is 3.7x, If you need it email me direct

This discussion is closed to new replies.