Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
When a copy is made there is a solid black line running down the entire length of the copy usually on the left side. Any one having this problem and does anyone know how to fix it?
2 replies
by ltbritt Accepted solution
Clarifications
by robo_dev Accepted solution
A solid line typically means there is ink leaking onto the feed rollers of the printer.
The fix would be to clean the rollers, make sure that the cartridges are properly seated and that the waste-ink recovery system is working correctly.
Inkjet printers typically have a waste-ink recovery system: either a recovery tank or a little sponge (called an 'absorber') that is under the print head.
If the absorber is soaked with ink it will leak onto the page. Your absorber may be full...
http://www.partshere.com/hppartslist/hpparts.asp?part=CB584A
This discussion is closed to new replies.
Trending Peripheral posts
Sort by Trending
0 helpful
4 replies
Question Locked
I need to know what port-type this is (What the plug is called)
0 helpful
3 replies
Question Locked
Are ink printers worth it in 2025, or are there better options?
0 helpful
4 replies
Question Locked
My PS5 controller wont connect to my desktop help?
0 helpful
8 replies
Question Locked
Fusion5 charging
0 helpful
2 replies