Discussion Locked

Fargo Pictura 310s

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Fargo Pictura 310s that was bought for a small print shop in 1998. This printer cost $14,000. I have recently upgraded to XP Pro, my problems are that XP does not support my printer, and the manufacturer does not have an updated driver or plan on putting one out. Is there a possible work around for this? I have another pc with win98 on it, the printer is hooked up to it but I do all my work on XP now. I can't send my jobs from XP to win98 because it would cost me another $3500 for a licence for Cadlink. Its a crazy situation as far as support goes and I don't want to roll back to win98. Any help would be greatly appreciated. Thanks in advance.

9 replies

by joseph moore

Ah, the curse of when the OS is new and the device is old. This happens a lot with XP (and Win2K before it). Older devices would not work with the new OS, and the device manufacturer had no plans on making drivers that would work.
So, I don't have much good news for you. There might not be anything that can be done to get the printer to work on XP.
My only thought, in after reading the Pictura 310e User's Guide is this.
Remove any drivers you might have on the XP box for the printer; it isn't working anyway, so it's not gonna hurt.
Then install the Pictura 310/310e 32-bit print spooler on XP.
Then, don't start it. Instead, click the STart button, and navigate until you get to the Shortcut that starts the spooler. At this point, don'tclick the Shortcut. Instead, RIGHT-CLICK it and choose Properties.
One of the tabs on the Properties window you might see is "Compatibility." In XP, you can run applications in Compatibility Mode, where you say for XP to run the application as if it were Win95, or 98, or NT, etc.
So, select Win98 as the Compatibility, then click OK.
And then launch the Spooler program.
Then see if that works.

Anyway, that is my only idea.

hope this helps

by joseph moore

In other news, I e-mailed Fargo for details.
I received a message back saying to contact www.primeratechnology.com for the drivers.
I don't know why Primera Technology, but that is who Fargo said to contact.
So I did.
I sent a message to Primera, stating what is going on and that XP drivers would be great.
When I get an answer, I will post it.

by joseph moore

Well, the bad news continues. I sent an e-mail to Fargo on why they recommended I go to Primera TEchnologies for tech support on your printer. I received the following short message from Fargo:

FARGO ELECTRONICS does not support this product. PTI does.

Gary Hagen
Fargo Electronics
Tech Support

by joseph moore

And I also recevied a message from Primera:

Sorry Joseph.
Unfortunately this printer will only work on Win 95/98/ME. I apologize for
any inconvenience this has caused.

Thank you,
Dan

by joseph moore

So, the results of all of this means that there will be no help for XP drivers from the manufacturer at all.

Therefore, try the idea I originally posted. A like to the download file for the Spooler is here:

http://www.fargo.com/Drivers_Firmware/spool.exe

And that is what it is called on the website: Pictura 310/310e 32-bit print spooler

Give it a shot running under Win9x compatibility. If it works, great!
If not, then I have no other suggestions.

Please post back what happens.

Joe

by dghaus

Hi, thanks. I will try that. You said to install the 310/310e print spooler, did you mean 310s?

by dghaus

Well I tried it with no success. There was a transmission error to the printer and the docs ended up on the Lexmark spooler.

This discussion is closed to new replies.