Fatal Exception has occurred
A BSOD appears with the following Message: A Fatal Exception OE has occurred at 028:40C76608 the current application will be terminated.
Can anyone help me out with determining the source of this error?
IT Employment
A BSOD appears with the following Message: A Fatal Exception OE has occurred at 028:40C76608 the current application will be terminated.
Can anyone help me out with determining the source of this error?
by mbeck
try checking the program you have loading on startup (TSRs). If you have windows 98 you can type msconfig from the run menu.
Also check the device manager and see if you have updated drivers for your devices or try reinstalling some of them.
Further help can be provided if you post your computer info.
by rtetrev
I know that memory can cause that error. Try swapping some memory modules around, or removing all but one (set) from the system. If the problem disappears at one point, memory is your problem. If replacing that memory doesn't solve it, or it still continues, it could be a bad memory slot or motherboard.
Also check to see if you have any potential memory address or IRQ conflicts. Sometimes overlapping resources can lock up the system or trigger BSOD messages like yours.
Good luck! I look forward to learning more about your system hardware and software setup.
by msamson
check this from ms
Q138788 - Bad RAM Causes Fatal Exception Errors Running Windows 95/98
by baklaguy
This discussion is closed to new replies.
Sort by Trending