296 replies
by bfilmfan
In keeping with Department of Defense policy on maintaining security, a user reported that his hard disk was no longer able to be read to be wiped. When the help desk called me for advice on how to handle the issue, I informed them policy required the hard disk to be destroyed and proof provided to the security officers.
So around 3 o'clock there was a request that I and one of the security officers stop by the motor pool.
Once at the pool, the user walked over with a plastic bag that was fileld with small bits of metal. Asking what this was, he replied, "That hard disk I called you about."
I asked, "What happened?"
He said, "Well you said to destroy it, so I had a tank run over it about 3 times."
I collected the bagged remains where they were later enshrined in a case on the director's wall as an example to not speak too literally to users....
by trockii
by jamesrl
We used to physically destroy, but not with tanks.
It used to be a job for the night shift when they got bored, or any of us when we needed to vent.
We would take them apart, put on the safety glasses and smash platters. If you mix them with enough other platters and smash them thoroughly enough, no one can put them back. This is after using a wiping tool. You like to be thorough when nuclear information is involved.
James
by zlitocook
by xtrainer
by johnm
by gwiggs
by owen
by scottsman
I had a director demand that we give him static passwords as he was tired of having to write the new passwords down on sticky notes. An attempt to explain the security dangers of 1. static passwords and 2. sticky notes on his monitor was severly rebuffed. I cannot repeat the language that he used.
Oh and what position did this director hold? Director of security of course.
My first reaction was to use his access to the budget to take a vacation, plane tickets and a 5 star hotel all on the government...but I am too pretty for jail and he still would denamd a static password.
by bfilmfan
Usually a nice phone call from a phone booth to the FBI and NSA gets rids of these kinds of idiots. Never use your name, but just relate what is going on.
Something to keep in mind if you ever run into this again...
by bigboss
by zlitocook
by yelt62
When I was leading up the project to migrate to W2K I wanted to test the executives accounts to make sure the migration went well. Guess what, my VP's password was his userid. Of course,I logged off immediately. Know how well our security folks do their job.
Rb
by featherman
In a "former life" so to speak, as a Help Desk representative for a major system component manufacturer, I had occasion to deal with Sys Admins / Net Admins / Storage Admins form various small and large IT shops. One call concerned our hardware and the software used to administer storage volumes attached to it. In order to set a given configuration into hardware, a reboot of the system, and removal of attached devices was required. No amount of rebooting (or any other documented or semi-documented tricks, for that matter) would get this hardware to perform as expected. Running some internal diagnostics indicated that our controller was working fine.
The customer elected to call me back the next day, as his schedule did not permit him to continue the support call... Well, he did, and this time with the VAR who sold him the original system present. The VAR and I discussed what we had done (on speakerphone, whith the end user present), and the VAR had the user re-try what we had discussed earlier. As soon as the user shut down the system and attempted to remove the devices, a shout rang out from the VAR: it seems that the server had power management enabled... When the customer was "shutting down" the system, he simply put it to sleep. Leaving the system and devices live. Hot (un)plugging a non-hot pluggable device about five times in the process...
Needless to say, the data recovery folks were very pleased to make this gentleman's acquaintence...
by house
by hal 9000
That I'm not the only one dealing with "Rocket Scientists" when it comes to customers.
But you have to have a good laugh when you finally work out what they where trying to do don't you?
Col
by house
I couldn't laugh at first because I was in shock. The customer was fairly aggressive with his previous phone calls, so we had to snicker a little bit when we explained the problem.
After the intial two minutes of dumb faces... we were bustin' a gut.
by zlitocook
1. User rang up and said:-
I cannot find my icon ( called Proclient )to login on the desktop.
We said it must be there ( due to policies - they cannot delete it ).
He said I can see another one similiar but it does not say Proclient it says the same as my password.
What he had done was single click on the icon instead of double clicking then typed in his password!!!!
2. Customer rings up and says I cannot log in.
I said are you using a Dumb Terminal or a PC.
They said what's a PC. I said a Personal Computer.
They said no I use works Computer!!!
1. User rang up and said:-
I cannot find my icon ( called Proclient )to login on the desktop.
We said it must be there ( due to policies - they cannot delete it ).
He said I can see another one similiar but it does not say Proclient it says the same as my password.
What he had done was single click on the icon instead of double clicking then typed in his password!!!!
2.
by kmbelk
This is a copy of an e-mail sent by a colleague. It certainly caused a riot in the office when I received it. I hope you enjoy.
"I have a friend who lives out in Sweden and she has a laptop - she went travelling and on her travels seems to have picked up an infestation of some kind or another in her laptop keyboard!!!!
She thinks its fleas but is not 100% sure, she just knows that "beasties" keep jumping out of her keyboard (this is completely true, its not a wind up).
She has tried leaving the laptop in a room and set off a bug bomb (those things that you set off to kill mozzies etc) but they are still there! She has tried hoovering them out but that didn't work either"
by rvokes
My best user story of the year?? well, here goes.
Whilst on holiday this summer, sat on the beach, reading some IT manual, my mind totally elsewhere. Then THE phone call, the one we all hate...
user: Help (no hello)I've got a problem...
me: hi, what's the problem???
user: I can't print...I get a printer unavalible error.
me: ok, have you checked the printer is turned on...
user: I have got my assistant to check it and she says that it's on.
me: has it got paper??
user: she (the assistant) filled the paper tray
me: hmmmmm... thinking....
user: does it make any difference that I'm not at my desk
me: no, It shouldn't do, as the wifi works all over the office... you are in the office right??
user: no, I'm in the airport...
me: (duh! why didn't I ask before) ok, why not send the document to your assistant to print it for you...?
user: I haven't thought of that... thanks
me: ok, bye
moral of this story, when on vacation, always have your wits about you...
Happy 2005 to all
by paul.osborne
Easy one this; One of the company Directors using his deleted items folder to keep emails he wanted to keep; funnily enough they were cleared out when he ran auto archive.
Not only this, but they also advised 4 employees to do the same.....
Also the logistics manager that dragged me into his office because his PC wouldnt boot. The monitor was turned off!
by fresnotech
I have had that happen any number of times.
I either get emailed or called with someone saying "Did you do something to my computer? It won't turn on." That almost always prompts me to say something along the lines of "Yes. I turned off your monitor. Turn it back on."
by buck
by pete_g
Support call from user:
User: This software won't let me enter a date.
Me: What date are you trying to enter?
User: 31st September.
Me: Err...How many days has September got?
User: Ah...
by yelt62
by mmcdonal
What does this mean? What is a computer room lights out? Nobdy knew what happened? What is a new opportunity? Why were you afforded another one?
Speaking as another IT tech, I can say that part of the "problem with users" is the tech's penchant to assume that everyone knows exactly what they are talking about.
This is frustrating for anyone in any profession. As an ex-attorney, I know you have to take the time to educate your clients in order for them to appreciate what the heck it is you are doing for them. This raises morale and salaries both.
by yelt62
I automated the function of the Computer Room Operator to the point that they were no longer required to fill that function. Of course they were redeployed to more appropriate and value added functions.
I have been in IT for a number of years (16) and when it comes down to "end user" communication sometime too much is detrimental, other times, too little is the same. You just have to determine the end users tolerance to something they don't really care about or target the communication to those who may.
"New opportunity" ='s our companies way of saying "here you go, another project for you!"
LoL
Rb
by dave
Used to work for a company that ran online seminars for accountants...
One of the sales staff wanted to add the site to her favourites, so I told her to type:
www.nameofcompany.com and then press enter...
Got a phone call back saying it wasnt working, of course I started to worry, so over I went to see her...
she had typed as the web address:
www.nameofcompany.comandthenpressenter
I kid you not!
by youdnever
by house
We had a customer bring in their PC to have us take a look at it. The customer complained that the cd-rom would only work half the time, and that he was losing some of his cds after he put them in the cd-rom dirve. The main issue that he had was with dead RamBus memory modules, so we had to open up the case to replace them anyways.
When we opened up the case, there were 20 to 30 cds inside?!?!? We narrowed the source down to the small slit between the frame of the case and the drive itself, where a couple of cds were still trapped. Needless to say, we did have to replace the memory, so it wasn't a complete farce. I still don't understand how someone could sometimes use their drive properly, and other times, shove the cd through the tower itself. :)
by fresnotech
by thumper1
by fresnotech
I would have stopped and looked at him when he asked how you were able to get the other one in there. He did say he used a knife to try to get it out, didn't he? I know that sometimes there are small issues with floppy drives, but to use a knife is a little overboard isn't it?
We've gotten to the point that all the new computers we put into the office don't have floppy drives. We invest about $10 each for people who need to take files to other computers so that they can have USB thumb drives. There aren't many people, but it save the hassle of a floppy going bad on us.
by john.hart
The users here have to change their passwords every three months. I got a call from one of the nurses(I work at a healthcare agency) that after she changed her password she couldn't log in.
Figuring she forgot what she changed it to I reset her password. She still couldn't log in.
I made my way over to her desk. For user names we let them use their first and last names. Believe it or not she was misspelling her last name.
by fresnotech
by sc00by_uk
We've just migrated from NT4 terminal services to 2003 terminal services and it's all gone pretty well (apart from the damn printers, but that's another story)
To save hassle I disabled the RDP service on the old server, whilst leaving the server switched on in case I needed to get some data off it that had been missed in the transfer.
Everything was good, until I needed to RDP into the old server a couple of weeks after the switch, so I enabled RDP on the old server and we logged on and did what was needed and went home.
The next day I had no fewer than 4 support calls in the morning wondering where the last 2 weeks of email had gone... ;) That'll teach me not to disable things when I'm done with them I guess...
by rycherulz
I'm a helpdesk/admin support agent, and part of the job is of course, password resets, both for the network and for the AS/400 user accounts. I received this call yesterday from a user, who, shall we say, isn't the brightest bulb in the box.
He told me he needed to reset his password, because he had been away for a while, and didn't remember what it was. No problem. It then took me about 5 minutes of coaxing for him to spell his last name correctly to me.
"S...A...U...D..... no, that ain't it. S...A..N... nope, that's not it either..." and on for several minutes.
He verified his employee id, so I assume it was the actual guy, and not someone else trying to use his account.
by steve
whilst having problems with my ADSL line the tech support guy at the other end asked how close my christmas tree lights were?
about 6 inches apart on the wire was my response.
apparently they had had a few customers experiencing slow speeds and been unable to connect and switching off the christmas tree lights fixed the problem.
well you learn something new every day.
by bhlang
by pr0teus
Steve,
Did this actually work??
And was it caused by the lights being plugged into the same socket or any socket in the building?
I've had some crazy problems of late with a client's DSL access and I'm just about grabbing at straws!!!
by house
by pdm45
It's true, here's a message from BT:
Important news I001 8th December 2004 - dsl affected by festive lights.
Important announcement
'Dodgy Christmas lights are being blamed for knocking over broadband connections, with imported flashing lights that don't meet UK electrical standards fingered as the worst offenders.'
"It has come to BT's attention that an extremely small percentage of seasonal lighting, which can be used both internally and externally may cause interference with the broadband service.
"When the lighting control unit is set to any mode other than a steady state it may generate high levels of radio frequency noise and may cause the broadband service to lose synchronisation.
"Investigations have revealed that the broadband service may be impacted where the lights do not meet the standards necessary for customer equipment marking."
So far, only a few dozen instances of flashing Christmas lights felling broadband have been reported. Incidentally, similar advice had to be issued last year. '
Can you please ensure that this is borne in mind when you are diagnosing ... faults for your end-users.
by jamesrl
I know as an ex Norteller that we sold equipment to BT to do DSL over power lines - are we sure this isn't the issue - that I can understand.
I had problems with computers in the same circuit as air conditioners.
James
by fresnotech
by jlanus
This remainds me of a (long before 2004) server, a $25K Compaq powerful 386 that worked fime but, after a few minutes it became painfully slow.
IT guys went to the server but always found nothing.
In short, it was that "pipe dream" screensaver that ate all CPU resources when the server was operator free.
- - - - - - - - - - - - - - - - - - - - - - - - -
This is not a user story but an IT guy story. I dislike the "users are all dumbs" mood because after so many years serving then I started to understand how they see us IT people. Specially programmers like for example me.
Actually most of the times, when a user doesn't get it, I realize that it was not as clear as we IT nerds see it.
The PC is intended for general use. Everybody, including that aunt of your's ...
Every guy who can't make it, and there are many, is a flashing signal of the failure to hit the intended target. As time goes by more and more children who were born near a PC are getting active and more old men are going retired, so using a PC is turning like using an elevator, something you give for granted.
This only hides the fact that using PCs is not easy. And by "using PCs" I mean operating software (the hardware is innocent).
I keep this in mind whan I design my programs. I'm sort of a "usability" advocate, seen as having betrayed the IT geeks and not being an user I'm sort of a lonely outsider from everywhere!
by jlanus
I don't mean at all that this thread is about bashing users.
Many postings show how you care for them, with affection.
It's that after thinking about what I wrote I perceived that it might be offensive. Sorry.
by rdufrene
by hepabolu
This story didn't happen this year, but it's too much fun not to tell it.
Every year at the beginning of the academic year, first year student had to take computer courses. One of the programs taught was WordPerfect.
One day a student came up to me and wanted to check if she had understood it correctly:
so for a soft return I gently press the Enter key and for a hard return I just hit it hard?
Can't remember what the answer was. :-)
by fgarvin
I have 2 stories, and neither has to do with the typical user. I work in a major Military Installation and work in Domain Admin/Desktop Support. Now for the stories:
1. An Upper Level Network Unix Administrator was concerned about the security of his system. As a Unix Administrator, he was granted Local Administrator rights on his computer. One day, we received a call saying his system Blue Screened everytime he tried to log on. Thiking that this may be a Corupt Profile, I acccessed his system remotely accross the network and started poking around. I checked security settings on the Winnt folder and discovered that all permissions had been removed except that of the user. Further checking revealed that all permissions on all folders had been replaced the same way. He was so concerned that someone was going to break into his system that he restricted everyone, and everything (Including the system) from accessing itself.
2. We have been attempting to upgrade our network to Gigabit standards. Our LAN Maintenance Shop replaced several switches in one wing of the building with new Cisco Gig Switches. Suddenly, many systems with Gigabit NICs began displaying problems with connectivity. However, we were able to get the problem resolved by setting the NIC and the Switch to Full duplex 100 mbs. Of course, we did not leave it there, we wan't to get the network speed up to Gig Standards. The Solution offered by our LAN Shop was to replace the NIC driver on over 3000 systems. This was not something we looked forward to doing, nor did it make any sense. Some of our team began looking into the matter on their own and discovered that the building was wired using 25 pair twisted cable (CAT 3) wire. This is Telephone quality cabling. Now that we had the evidence in hand, we went to our boss and told him. He went up to the LAN shop and told them, and they flatly denied the existence of such cableing. So, the boss came back down to us and said as much. So we showed him again, took the numbers off the wires, looked up the codes on the internet which verified that the wire was in fact Telephone wire and was not to be used for anything other than voice, Token-ring or 10-base-T. In addition, we looked up the IEEE standard for Gigabit networks and printed that up as well. All this eveidence went up to the LAN Shop. Their response is to have Broadcom, Intel and 3 com write new drivers.
Sometimes the enemy is within.
by fresnotech
by robbi_ia
by husp1
by simply dope
Support call I received:
User: My search isn't pulling back any results.
Me: (tests search) Ok, it seems to work with me. What's your date range?
User: From 10/31/03 to 10/1/03.
Me: (silence)
Me: Um, you've got the dates backwards.
USer: Why does that make a difference?
by kaceyr
This happens so often with my users that we now write code to swap the dates when the user specifies the date range backwards.
We also recompute the last day of the month when they screw that up (almost as often as the reverse order date range).
Ya gotta love them users!
by timbo_in_nc
USER: I can't receive any email
ME: Do you get any kind of an error
USER: No, I just don't get any email
so I got to her desk to see what the problem was, I sit down and hit the send/receive button and everything comes in fine. She said you are a genious, how did you do that? I went into her properties and selected the email to send and receive automatically. To make myself look a little better I explained that outlook express had been corupted and I had to reprogram it to send and receive. She was soo impressed, she said I dont know what we would do without you IT people!
by fresnotech
I do that sometimes to, tell the user that it was something a little more, but normally I say it with just enough sarcasm that they would hopefully figure out that it wasn't that hard to fix.
I can't remember how many times I will visit someone, and tell them what I did, with the sarcasm, and watch as the person's face figures out that I was being just a tad bit insincere. They are used to the sarcasm now though.
by arahigihs
by lee d
One of our sales reps had an ageing Compaq Deskpro 2000 as his workstation at home for collecting emails and such, and one day he called up the helpdesk to say it had a fault. So, we asked him to bring the box with him the next time he was due in the office.
When he came in to us, he had a big grin on his face, and said "You won't believe what I've done this morning!" He then proceeded to tell us that when he was loading his car (which is a large(ish) 4x4 off-road thing) he left the base unit by the boot while he collected the rest of his things. He put his things in the car, and then reversed out of his driveway. As he reversed, he felt the car go over something large and solid. He got out, and sure enough he'd driven over the base unit!
He handed the unit to us, which initially looked unscathed apart from a huge tyre mark running diagonally across the top. However, when we put it on the desk we discovered it was, well, bent! It rocked quite noticeably when placed on the desk - I guess the metal case cover (which is pretty tricky to remove on the old DP2000's anyway) had bent under the car's weight, and because of it's rigidity had pulled the frame out of shape as well.
Even more remarkable, though, was when we powered it up: it still worked!!
The rep found all this highly amusing - he laughed the whole time he was telling us about this - but his boss wasn't so amused. He made him keep the twisted computer instead of surprising him with the laptop we were replacing it with!
by fresnotech
by lcave
by xtrainer
User: Hi! I need some help. I'm trying to burn Microsoft Word on a CD so I can install it at home, but it doesn't work. When I copy it to my drive at home I can't get it to run. What do I need to do?
Me: Let me just understand this. You're trying to take a copy of Word so you can install it at home.
User: Yes...
Me: And you want my help...
User: Yes...
Me: Did you know that software is copyrighted?
User: Well, yes, but...
Me: So you're asking me to help you steal copyrighted software...
User:
by fresnotech
by arahigihs
Some of our users recently decided to trade desks. Instead of clearing everything off of the desks then relocating them (they are modular desk/cubicles and the desk heights are adjustable) they moved the desks first and were surprised when one of the computers (monitor, tower, keyboard, etc.) scoots right off the desktop and, obeying the law of gravity, falls the 4 feet to the floor.
The plastic face plate shattered, but the computer still works.
by rcsoar4fun
I support about 400 remote users, some 100 or so miles away. These tend to be critical systems that must be back up within 4 hours of a failure. I get a call on Friday afternoon that one user had moved their PC to a new desk and it would no longer power on. The location was about 75 miles away and I had no desire to go on site. I had the user double check the power cables to which I received a response of "I already checked that" with a tone of "I am NOT stupid". So I asked the user what color the power cables were. He replied both were black, but one was thicker than the other. I had him swap the power cables between the monitor and CPU. I said the cables look exactly the same but are not interchangeable. He said that was pretty stupid, to which I agreed. It then booted without issue. Of course the power cables were fine, but he had not inserted it all the way. The hardest part about the call was trying to explain the fix to the other techs in the office that heard the call.
Kristopher
by fresnotech
by lee d
So far I've read many examples of dumb users, but nothing about those who are just plain gullible. So here's my gullible user story - it's a bit old but I think it's worth telling again.
One day I got a call on the helpdesk for a user in our labs who was having trouble printing. I went to see her and discovered she had tried many times to print, but to no avail. She told me that she tried everything - replacing the cartridge, reseating the paper in the tray, turning it off and on, and even shouting at it! As she mentioned the verbal abuse (and as I was in the mood to be silly), I said "Aaah, now that's what you're doing wrong! These printers are very sensitive, and they prefer it if you talk to them nicely."
She looked at me skeptically, so I proceeded to stroke the top of the printer and gently ask it to start working for me. I then re-sent the print to it and - hey presto - it printed out! The user's face was a mixture of awe and disbelief! After running off several more prints, I told her it would be alright now and to let me know if it stopped again.
I never heard from her about the printer after that, but I walked past her office a few months later and saw her whispering gently to her printer whilst stroking it! She even passed on this bit of "technical expertise" to other people in the building!!
by rcsoar4fun
I gave a computer to my aunt, who is more than somewhat technically challenged. I get a message from her one night that the CD-ROM ate her mouse and she wants to know where she can download another one, or maybe by one at Walmart. At this point I am concerned, if anyone can make a CD eat a mouse it is her. I call her back to discover that when inserted a CD from a cereal box into the drive. When it autoran it locked up the computer, causing the mouse pointer to disappear. A reboot and all was fine.
Kristopher
by answerman
I run a little residential and commercial computer service and solutions company....
User: My speakers just stopped working
Me: When's the last time they worked?
User: Yesterday before I vacuumed.
Me: Is the light on the speaker on?
User: Yes
Me: I'll be right over.
Found out the plug came out of the sound card when she vacuumed, and she put it back in the mic input.
Service Call: $50.00
Time Spent: 30 seconds
Distance: 1 mile
Users that are too embarrassed to admit they might have done something wrong.... PRICELESS!
by rmccready
by mhasf
When teaching a new user how to use her computer terminal, it was getting close to 10:00AM. Both of us being smokers and coffee drinkers, we were getting to that point of withdrawal onset. At this point in her training session, we were reviewing keystroke shortcuts.
Anyway, we came upon a suitable breaking point, and I told her "...ok, it's time to get off the computer." She looked at me with a puzzled look and then looked back at the screen. She exclaimed that she was not [perched] on the computer. It was all I could do to keep from losing it right there and then. So I went on to help her along and said, "No, let's break now!" She joyfully exclaimed "I know how to do that!", and very confidently hit the Break key.
Happy Holidays!!!
by fresnotech
by luschen1611
This isn't from 2004, but it is the funniest phone call I've ever had.
This happened back when California was having those black outs because of the lack of electricity. This lady calls up and says that her computer would not turn on at all (keep reading....not due to a black out). She would press the power button but nothing would happen. I verified that she was pressing power on the system and not the monitor....checked good. Monitor had a green power light. I asked her to look for the black power cord behind the tower to ensure it was plugged in.......nope, it was unplugged. I asked her if she unplugged the power cord. She said she did! While having a dumbfounded look on my face I calmly asked why she went and unplugged it. Her answer? "I don't use the CD-Rom at all. And I'm down in California where we are having power outages. So I thought I would unplug the CD-Rom to conserve energy." I had to put her on hold after that so she wouldn't hear me laugh. After telling a couple other phone techs who also laughed, and bringing my composer back under control I explained that she needs the power cord for the computer to work....it isn't just for the CD-Rom. She understood and all was well.
by answerman
One phrase, one meaning, 80% of the calls to helpdesk are filed under that acronym. And what does it stand for my fellow techs? Simple.....
P.E.B.K.A.C. =
Probable Error Between Keyboard And Chair
by fresnotech
I never had the acronym, but I have definitely used the terminology before. I have even told a user that, but only a user that would know I wasn't being purposely mean, just making a joke.
"It seems that the problem was somewhere between the chair and the keyboard."
Watch them look between the keyboard and the chair to figure out what I mean, especially if they aren't sitting in the chair anymore. Normally takes a couple of seconds to get it right.
by it_lobo
by toolhorder
by dbsteele
I was helping my accounting manager to do some important reports for head office. We worked late into the night, and were both pretty crabby. This was in the days of 5 1/4 in diskettes, and we had no network. I was working on one PC, she had the master system on hers. I finally finished my part of the work, rushed into her office with my diskette. I inserted it into her computer immediately started laughing hysterically. She thought I had finally cracked.
What I had done, however, was push the diskette into the gap between the two diskette drives! It was the only copy, so I had to find a screwdriver (no easy task at that time of night) and dismantle her computer before we could finish.
by rk bill
I run the IT/Records Dept. for a State Agency.
1. User calls - I lost the thing that does my stuff.
I get to her desk and find that she had closed the MS Office shortcut bar and when prompted "....Do you want the shortcut bar to start automatically when you start windows" apparently answered 'no'.
2. User calls - I can't print.
I get to her desk and find that she has closed the MS Word standard toolbar.
by fresnotech
by fagell
by pwrightson
We have a non-profit customer that also has a small retail store. The store manager was trying to do an inventory, but the POS/inventory system was having an issue. They were using a hand-held to scan the inventory and load it into the POS PC but the files could not be sent to the backend (unix) system.
Our customer had an open ticket for two weeks with the vendor of the system, who insisted that everything should be working fine and that it was obviously something the customer had done (nice support!) since "well, the server can see the PC".
So the customer involves us as we handle their general IT needs. I had called the vendor a couple of times and was trying to understand how the system was supposed to operate - this was our first involvement (and last, hopefully) with this software. I had set up a conference call between myself, the store manager, another one of our consultants and the vendor.
Me: OK, so let me get this straight. You dump the files from the handheld into the checkout PC, and that is working fine.
Everyone else: Yes.
Me: How do the files get onto the server? What process transfers them.
Vendor: Well, the user moves the files into a folder on the server using Windows Explorer.
Me: So, you are using samba.
Vendor: Yes, and it is working fine. When we log into the server, we can see the PC.
Me: Ah, but that would be using the samba client tools. To push the files from the PC you need the samba server to be running, right?
Vendor:
30 seconds elapse.
Me: Hello? Everyone still there?
Vendor: Yes, we are just discussing it.
1 minute later.
Vendor: OK, everything should be working now.
Store Manager: OK I see it. I am copying the files. Its working.
Me: So you did not have the samba server running?
Vendor: OK. I think the issue is resolved. We are going to close this case now. Thank you.
by seanh
by paulb7
I upgraded one of my customer's whole network system about 2.5 weeks ago. New HP Proliant ML350 G4 and 24 port switch running Small Business Server 2003. Took the whole weekend. They also upgraded to ADSL supplied by their ISP.
Got a phone call from a very irate director. Your new )#Q*#Q%(*# system does not work. No internet, can't log on !! NOTHING !!! WHAT THE HELL DID YOU SELL US AND INSTALL HERE !!!??
Rush over to check it out. Server says "Cable Unplugged" Check the network cable, everything is fine. Go check the switch, lights are off. Follow the electrical cord to the wall plug, it's switched off. Switch it back on, everything works OK.
One of the directors was moving old computer equipment into the store room where the switch is located. He packed everything neatly together and pushed an old 17" monitor against the switch of the wall plug switching off the electricity & the 24 port switch. Needless to say, many red faces everywhere. Still, no apologies to me for cursing and blaming me for their stupidity.
Go figure. Looking for a different profession.
by btang
I used to pick up help desk calls when I was working for a large coperation. One day a user called and told me that she couldn't turn on her computer.
I asked: Is the power cord plugged into the computer?
She answered: Yes.
I asked: Did you turn on your computer?
She answered: Of course I did!
I asked: What did you see on the screen?
She answered: A black screen.
Then I asked her to press the power button but she told me: I tried many times already. My computer is not responding!
I asked her: Which button did you press?
She said: The button under the screen.
LOL - She turned on the monitor instead of the PC tower!
by gwiggs
Back in the early '90s I gave my mother my old 386sx computer. Her first graphic user interface (Windows 3.1). I had just completed my CSCI degree and wanted an excuse to upgrade.
She hauls the computer across country and set it up. Then she called me, to complain that the mouse wasn't working. Windows 3.1 wasn't exactly stable, but when I walked her through some trouble shooting, everything seemed OK.
Every time I asked her to try the mouse, she would say the the cursor ''jiggled'' a little, but the pointer never moved. While I was trying to figure out her problem, I would pick up my mouse and tap it on the desktop. I noticed that this would cause a slight jiggling action.
When I asked her to describe EXACTLY what she she was doing, she told me that she was picking up the mouse and setting it down on the mouse pad where she wanted the cursor to move to. She had no thought of sliding it, just figured that it was somehow connected to the mouse pad and moved accordingly.
by davejesc
I had a client who had other building users complain that their wireless signal kept going away. It turns out this only occurred when the client was logged onto the network. If they were off or away, everything worked fine.
Turns out the client had relocated the router onto their desk right next to their mammoth PC monitor.
It only took a few seconds to realize that the monitor RF was blowing away the WIFI signal - or that the CRT gun magnets were distorting it. When the user was not logged on or at their desk using the computer (monitor on), everything worked fine!
Relocated the WAP away from this nuclear PC monitor and life was great again.
Well, it was funny at the time.
by warwizard
One time I was assisting a Netware admin install his NW 3.12 in his new PE2300 server. (This was a few years ago!) He had a NW 2.2 server on an old DX40 system. Up to this point he had been knowledgeable and able to do all the tasks, so I was surprised when we had the following discussion:
Me: "Ok put your Netware CD in the drive."
Customer: "How do I do that?"
Me: "press the button on the CDROM drive."
Customer: "Ok it opened and closed again!"
Me: "Press and release the button."
Customer: "Ok it stayed open that time. Which side goes up on the CD?"
Me: "The label goes up."
Customer: "Ok, ... it's copying files now."
I checked the configuration on his old server it did not have a CDROM drive, this was his first time he had ever seen a CDROM drive. I was impressed that he asked which side went up!
by csclark
I've noticed that most users don't fully understand the concept of power, at least in reference to computers. At least 90% of the calls I get about computers not coming on properly are because they have no power - either the monitor or cpu is unplugged or the power strip is turned off. These are my two best ones:
I worked in the administration complex of a local school district, in IT. We had a bad thunderstorm and lightning hit a transformer down the block, which caused the transformer in our parking lot to go, too. Of course, all our power went down. Central office used terminals connected to an AS/400 several miles away. When their terminals went off too, they called us asking why. We told them all power was out, to wait for it to come back. Later, the power came up half-way as they replaced one of the transformers. The lights were flickering on and off. Two minutes later, we start getting calls that the terminal screens are shrinking and expanding, making it hard to work. I asked them what their lights were doing? They said 'going on and off'. So I asked them what makes them think their terminals will work if the lights won't? Their answer: the main computer they are connected to has power!
The second is not technically a power issue, but that's what they called in. We gave one of our users a laptop to replace her old desktop pc. The laptop came with a docking station, monitor, keyboard, and mouse. I showed her how to use the laptop in the dock & out of it. The next morning I get a call that the computer will not power on, but the monitor is on. I go to her desk and the green light is on on the monitor alright, but there is no laptop in the dock. I asked her where the laptop was and she said at home, she didn't think she needed it here. It didn't occur to her that the monitor, etc., wouldn't work without the COMPUTER!
by moira
I must admit I read the original post not understanding what you were talking about. I assumed this was just my lack of knowledge :) good to know someone else didn't "get it" either.
It does illustrate the point that communication is a two way thing and that some end users inability to understand something is, while amusing, partly the fault of the IT dept in explaining it clearly.
by house
I was a little bit embarassed at first, but I'm glad that I'm not the only one.
The original post has been edited and removed?!?!? Now we'll never be able to decipher it. :)
by moira
by jwmccoy
In a large customer service department - we had terminals on each desk. I received a call that one of them had smoke coming out of it. I went out and sure enough... a pillar of smoke was coming out of the back.
I asked what had happened. The lady responded, I was just watering plants. Looking at the terminal again, there was a plant on top of it. Apparently - water had entered the terminal and shorted it out. I explained that they shouldn't put anything at all on their terminals. Much less a plant.
Upon closer inspection... I noticed that they had watered a plastic plant!!!
by singerguy
I went to a small remote office to take care of some routine maintenance items. While there I was told that several users were having trouble with their phones and hooking up their laptops to the network. These users are in a block of desks that free stand in the center of a large room. They are home health nurses who work in the field and this is just a place for them to update their email and check voicemail. Their phones have to be plugged in to AC power if they want anything more than just a dial tone. There is a small switch mounted between the desks that lets them share the one network drop in the room.
After a few minutes of troubleshooting equipment I found out that they had redone their power strips. Now the wall power went to a new switchable strip that all their Christmas tree lights were plugged into, and then their existing strip was plugged into one of those slots.
Sure enough, someone had switched off the tree lights the night before by turning off the new power strip, thus killing power for all those desks. I lit the tree and their phones with one flick of the finger, followed by a teaching moment. LOL
Another power strip story from last week. A user told me her printer had died and that she had "tried everything" to get it to work. I asked her in a teasing voice (she is a good friend) if the printer was plugged in. She replied with slight irritation that of course it was, and everything else plugged into the strip was working, so she knew it wasn't that.
The first thing I noticed was that this dual row strip had one side unswitched (where all her other things were plugged in) and the other side switched (where just the printer was plugged in). Yep! Someone had stepped on the very exposed power switch, turning off the power to just her printer.
I think she was most mad that it took me all of 15 seconds to identify and solve a problem she had been fussing over for hours.
by rockymtnman
Trending Desktop posts
Sort by Trending