Discussion Locked

FaxServe 5.0

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does this version work on NW5.1?

5 replies

by ole_ethernets

It will work with NW5.1, however you will need to go to http://www.support.cai.com and get the very latest patches for FaxServe.
Bear in mind, that the Faxserve product requires the use of IPX protocol on the server, and on the Rendering Agent PC. Another limitation we found, is that the rendering agent requires Win95/98, and does not install or work correctly using Windows NT 4.0. With large faxings of 100 or more, our Rendering agent reboots all the time. Then, if we dont log back in, it will not fax out the faxes till we do. Just a note here, after 3 years of FaxServe use. We have found a Fax Server system which works super with Netware, and works fine with TCP/IP only. It is BisCom at http://www.biscom.com/. It is an absolutely wonderful product! It snaps into NetWare very easily, and is easier to administrate. It also eliminates the need for the Rendering Agent. It comes preconfigured on Windows NT OS, with tested hardware and software, and company remote access installed, so BisCom can come in via modem and help you with it. They have great Tech support, and we are very pleased with their product, even if it was a little pricey. But, you get new hardware with it too, and you don't end up being the one to "beta" test the system, or troubleshoot weird hardware problems etc. Good luck to you!

by kirchbee

Faxserve v5.0 is not supported on NetWare 5.x. The company that you will have to contact is called ACCPAC as they have bought the package from Computer Associates. You can buy v 6.0 for NetWare which will run just fine as long as you are a running in a mixed IP/IPX enviornment. ACCPAC will not certify that Faxserve will work in a NetWare pure IP enviornment.

This discussion is closed to new replies.