Discussion Locked

File Server

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a file server setup with linux Samba (Mandriva 2009) we have 8 computers in the office on DHCP we all get booted of the server when someone is transferring big files, burning files directly from the server or working on a big file size document. Here is the specs for my fileserver:

- 2,000+ AMD Athlon XP 1.67 GHz that was turn into a Linux Samba (Mandriva)
- 2x 500GB Hard drive

Is there component or parts to upgrade for our fileserver in order for it not to kick us off when to much data transfers???

6 replies

by robo_dev

If the server is working properly, even if it is slow, user connections should never drop.

When your workstations are disconnected, can you ping the IP address of the server?

A random guess is that your swap file is too small and your server is running out of memory. How much RAM is in the server?

Do you need to logout/logon to get the connection to work again?

Your network may be either misconfigured or inadequate.

What sort of network topology do you have? What OS are the workstations?

by ljrabino

When workstations are disconnected can't ping the server ram is about 2GB.

Yes I need to restart our workstations in order to reconnect again . 5 Macs & 1 XP & 1 Vista. Windows don't have a problem reconnecting just macs need to restart...

by ljrabino

When I get disconnected and try reconnecting I get this error message "The Finder cannot complete the operation because some data in "sm://inari" could not be read or written (Error code -36)" All the files is forced to have a permisssion of 755

by robo_dev

http://www.macfixit.com/article.php?story=20061212233624799

Error 36 is related to how samba clients authenticate to the samba server.

http://support.apple.com/kb/TS1564?viewlocale=en_US

Now it's still possible that your server network connection is getting overloaded and causing this issue to happen.

But first I would try fiddling with the samba settings on the server and clients.

Apple description of error 36:

"This error can occur if your Mac OS X 10.4 client is trying to connect to a Samba or Windows (SMB/CIFS) server that only supports plain text passwords. If you do not see the above message in the Console, you are not experiencing this issue and should try normal troubleshooting

Unlike Mac OS X 10.3, the Mac OS X 10.4 SMB/CIFS client by default only supports encrypted passwords. Most modern Samba or Windows (SMB/CIFS) servers use encrypted passwords by default, while some Samba servers might have to be reconfigured.

by swdswan

Good Call. I had some similar problems on my server and they went away when I added RAM.

The only other option I can thinnk of is if the system is using old network cards, sometimes they can't handle the load of network traffic AND a big file transfer. With the system described that should not be an issue.

I think you are right and the Macs are having SAMBA issues.

This discussion is closed to new replies.