Discussion Locked

File server Q:

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am Having problems with my file server we have a bought 35 computers hear all running win 95 or 98 and 5 computers run NT three of the 35 computers are not able to see my file server the computer says path not found.

BUT if you keep trying it is able to find the file server I can not find the problem

The problem started when I changed the HUB sating from hard set to auto set thin I changed them back after my file server jumped off the net because of the change and it hasn’t been right ever sence.

2 replies

by curlergirl

Are the computers that can't see the server NT or 95/98? What network protocol are you using? First check your NIC card settings on the workstations to be sure they are set properly (i.e., 10 or 100 speed, half or full duplex, or whatever settingsyou have available on the particular NIC drivers). The rest depends on your network protocols. If using TCP/IP, check if you can ping the server first; then if you can the problem is name resolution rather than purely network communication. Then, if name resolution is the problem, you need to check DHCP and/or WINS settings, if you're using them, or use an LMHOSTS or HOSTS file to resolve names. If you need help w/any of this, feel free to email me directly. Hope this helps!

This discussion is closed to new replies.