Discussion Locked

Flaky Athalon

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently aquired an athalon motherboard with an 850 MHZ Athalon T-Bird (Socket A) and 512 MB of high density ram. When I installed it I used a Blank 17 GB Maxtor Hard Drive. Now when doing certain tasks it will just reboot the PC. One of which is to install EZ CD Creator 5 Platinum. I have reloaded Win 2k several times, and each time come up with different symptoms. It also will freeze entirely at odd intervals. Any Clues?? The MB is and ECS K7VZA, and I have tried using another ram stick of a different brand.

11 replies

by tathtar

Downgraded to win ME upon your suggestion that EZCD has problems with 2000...thanks. Had 2 problems though, heat build up seemed to be the other.

by csmith

I have seen this caused by several problems.
The most common is a Power Management conflict between the Motherboard and the Operating System.
When the settings conflict the OS tries to falsely put the system in doze/standby, and the BIOS reboots the machine because of a bug.

The less common problem is the power supply.

The problem with properly setting up these motherboards is figuring out what they really mean in the manual, and then getting Windows to cooperate.
Regards, Chris

by reverendzero

That Win2K and Adaptec problem sounds the most promising, but odd lockups at different times could be a different problem with the same symptoms.

Most of the time it's a heat problem; I preach this because I refused to believe it until it was 100% foolproof. It's also easy to test. You can buy a fan for about 8 bucks to stick in your front bezel or out the back or, if you have an old P/S, rip the fan out of that and wire it to a power connector and try that out.

Hope this helps.
Butch

by tathtar

Nail on the head with this on. I moved all the cables that might be getting in the way, and installed a 10 dollar fan. This almost entirely stopped the lockupps. Been running 3 days and locked up 2 times instead of 20. Thanks a bunch

by jhackett

Dump ez cd creator 5. It causes tons of problems with 2000. I started using Nero Burning and it works great with 2000. The problems with platinum and 2000 are well documented at www.Roxio.com. I have spent hours working a fix for this with no luck. Changing software worked. If you are having problems with reboots in 2k. Go into sevices and right click on the service affected. Make sure in the recovery tab that it does not say reboot on errors. And as with thew rest of the answers keeep yor athalon coooooool.

by tathtar

Unfortunately dumping ez creator 5 was not an option. Opted for win me instaed which seems to work fine. Biggest problem was heat see answer 3.

by zlitocook

What watt is your power supply? if you use any thing below a 300 watt an athalon will give you trouble. Just a thought.:)

by tathtar

I purchased a 300 watt power supply, because I was already aware of that issue. Thanks anyway though.

This discussion is closed to new replies.