Discussion Locked

Floppy Disk drive very slow

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Using W2K OS but occasionally have to use DOS based programs, eg Drive Image. In this particular case the program is very slow to respond, mouse almost hangs. So slow as to be not worth using. Computer is P111, 390 Mbs Ram, plenty of HDD space. Is this due to something in configuration? How to I speed the floopy drive up? Other PCs using W2K are much quicker when running out of floppy drive.

nzdada

5 replies

by wpmercer

All floppy drives run at different speeds. During the boot process, the rate of spin is 'saved' in the BIOS. If that same program floppy is put into another computer, it will work faster. IMHO, Your floppy drive is running too slow and is about to die.

by brent t

Nothing to do with the PC or the floppy drive. Win 2000 is not so friendly with DOS programs, DOS is an 8 bit program, WIN 95 was a 8-16 hybrid, NT had some DOS functionality but 2000 has gone beyond NT. Obviously the app can run , but it will be slow. The only reason I could think of that this particular machine could be slower may be a printing issue. NT/2000 do not allow direct access to ports for DOS programs (which is of course how DOS works) so if the slow done you are noticing is related to printing there is nothing you can do about it. I have been trying to find an add in that will allow direct access to the ports for DOS programs to speed up printing and it is not out there.

A quote describing my thoughts on Windows:

"Itsaid it required WIN 95 or better, so I installed linux!"

Good Luck

This discussion is closed to new replies.