11 replies
by dmiles
It could be that the floppy heads are not aligned on the floppy with the floppy drive,this will happen with floppies that are used a lot
You can try to copy the old data to a new floppy,open my computer,right-click on floppy,with disk inserted on win 98 and then choose the copy command from the list
by nampilaj
by kcmeister
soulrider is probably right, but I have seen around 30 instances where floppy will give same error message in Windows 2000. The fix was to reboot the computer, then it would read the floppy. If that didn't work, the only other option is to replacethe floppy drive. Go with soulriders suggestion, and if that doesn't work, try rebooting. If not, try other floppy disks, and you may need to replace drive.
have fun,
kcmeister
by nampilaj
by donmars
by nampilaj
by blackcurrant
Here are a couple of solutions that have cured this problem for me:
1. Go to Device manager and delete the floppy drive controller. When the system reboots it will detect the drive and reinstall a new controller.
2. Go into your BIOS and make sure that the floppy drive is not swapped.
3. Run a commercial diagnostic utility. I have cured this problem in the past by running Norton Utilities. Running the PC diagnostics cured the problem!
Hope this helps
by nampilaj
by dimm
by nampilaj
by nampilaj
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending