Linux

Ask something
Discussion Locked

FreeBSD SCSI Device Trouble

0 helpful
5 replies

by network_ops

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey all,

Running FreeBSD 4.0. Installed a SCSI tape device which is being assigned ID sa0 during boot. It is recognized as a device off of ahc0, which is my Adaptec SCSI card.

However, when I go to /dev to find the device, neither ahc0 norsa0 are listed. Any thoughts?

Thanks,

Keith
(kmccammon@tidalwave.net)

5 replies

by computechie

Make sure the devices are configured in your kernel, and then go into /DEV and do a MAKEDEV ahc0, and MAKEDEV sa0.

This discussion is closed to new replies.