Discussion Locked

fresh Win2000 server with 160gig drives

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi

Dies anyone have a step by step procedure for installing Windows 2000 server, with 160 gig drives or higher? Its my first time installing with large drives. I have Win2000 server ( w SP4 )

I am installing on a new asus P4V8x-X with 2 x 160 gig maxtor drives.

On first attempt, it only showed me one drive, and only offered me to format in NTFS.

So I then used fdisk, deleted partitions, re-partitioned, and then started the install over again. This time it sees both drives, but will only allow me to format in Fat32. ( I know I can change this later )

However, I am interested in the best method of doing a fresh install.

Thanks

4 replies

by borg7of9

Yes I read that article, however, I was also told that with new motherboards, and win2000 SP4, this is not needed, so somewhat confusing

by unclerob

Take into account that because of the large drive sizes involved, if you plan on running a RAID 1 setup (drive mirroring) you will notice a performance hit. You didn't mention if you're going to be using a raid controller to enable this or if you're going to use a software solution to enable this raid config. If you're going to run 2 x 160gb drives to give you 320gb in total storage space - WOW! That's pretty decent storage. Seems like you found your answer though, even though it doesn't allow you to format in ntfs, you can do this afterwards manually (convert c:/fs:ntfs from the command prompt). How big is your system partition (partition you plan to install the OS on? - maybe your partition sizes are too big, maybe limit the system partition size to 10-20gb and allocate big chunks of drive space for the remaining partitions.) The other poster provided a link to Microsoft concerning the drive space limit, it's a good place to start as well. Let us know how this works out for you.

by cg it

provided that you have the latest service pack your correct. 48 bit LBA is included in that service pack.

best method of a fresh install? depends on how you want your comp setup and what your going to do with it. many partition out their drives. #1 it takes a lot less time for the comp to look through a 40GB partition for what it wants than to look through a 320GB partition. It's also a lot faster to defrag a 40GB partition that it is a 320GB partition. Further, it the O/S ever tanks for whatever reason and you have 1 BIG partition, you'll have to reinstall and you'll have a mad scramble to save what you want. If you partition out and save important stuff on a different partition [applications as well] and have the O/S only on 1 partition, if it tanks well not a real big problem.

This discussion is closed to new replies.