Question Locked

Full Factory Recovery - Specifically the driver/application installing

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
full factory recovery went all well, then i got to the white screen with the drivers and applications installing, i got to 40 out of 50 and my computer all of a sudden goes to sleep, i wake it up and i get a blue screen, it restarts and when it loads regularly it's a black screen... shows the mouse, and nothing else... i'v tried f8 and "repair your computer", start windows normally, safe modes, almost everything and it takes me to the black screen after the loading bar with windows passes.... anyone got a clue what to do... how to finish where i left off or how to start the full factory recovery again?

6 replies

by older mycroft

In other words, what [u]operating system[/u] and what [u]type of computer[/u].

Obviously the installed operating system had, by default, a cut-off point where it blanked the screen due to keyboard/mouse inactivity.

With the difficulties you are obviously having now, I would suggest that you invoke a full install again, but this time you don't sit back and watch it or walk off leaving it to it's own devices (pun intended).

When it gets to the point of installing the drivers, ensure that you move the mouse about continuously - that way you'll prevent the system going to sleep.

This is all guesswork really since I don't know what you are installing or what you're installing it onto. ;)

by edgam20

Gateway MT6840 Notebook, Windows vista premium, the thing is that i turn on the computer, it does everything regularly, shows the windows loading bar after that nothing, black screen with my mouse only thing able to move... i'v done f8 to try to take differnt approaches but nothing... what i'm trying to do is either A) get back to that recover box and start a new factory recovery or B) continue from the driver/application location i was at....

by older mycroft

Vista is a commodity that I don't have much to write home about, in other words: I don't go there unless I have to.

Sorry, there'll be some more adventurous peers along in a minute. ;)

by oh smeg

And have it remain working after applying all the drivers & Applications I can give you a few pointers here.

After you get the actual OS installed kill the recovery process. Using a different computer connect to the Gateway Site and download the drivers for your NB Individually and install them that way [b]Individually[/b] and reboot when asked to.

It also helps no end if you disable the Sleep Mode or Power Saving Mode when you start the recovery process after the OS is installed as on a NB this will cause you nothing but grief. Restart the Recovery Process again and this time [b]Do Not[/b] set the system to receive Auto Updates while finishing off the Vista Install. Place a Tick in the Not Now or Latter Box that appears prior to the first log on of Vista. After you have Vista Running install the Sound & Video Drivers and associated software and then reboot the computer.

Download all of the required Drivers from here Gateway's Driver Site for the MT6840 NB here

http://tinyurl.com/2xgbl

You'll need to enter the NB's Serial Number and then you will be shown all of the Drivers and other available downloads for this individual NB not the entire family of them for their production life.

And most importantly read the directions here on [b]How To Install Drivers & Software[/b]

http://tinyurl.com/5blefv

Also while you are at the Gateway Site check out this link for the Battery Recall for the MT6840's.

http://tinyurl.com/5w8lkb

Col

by rob miners

to see how it goes and I like the part that says Free chat support

Windows Vista - My notebook's video is not working correctly By Gateway

http://support.gateway.com/s/Checklists/BPC/ck2007022840.shtml

Free chat support

https://support.gateway.com/Support/copilot/en/us/chat_us_gw_tech.asp

Keep us informed as to your progress if you require further assistance.

If you think that any of the posts that have been made by all TR Members have solved or contributed to solving the problem, please Mark them as Helpful so that others may benefit from the outcome.

This discussion is closed to new replies.