Discussion Locked

Geforce 2 Mx 1280 problems with directx

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have just built a PC. Specs are as follows:
KT7A-RAID Mobo, AMD1000GHz Processor, 224Mb RAM, Gforce 2 MX Graphics Card, IBM 30Gb HDD, ect. The problem is with the graphics card. When I try to run Dxdiag.exe the monitor switches of and I have to reboot. Also it will not run 3D games (Q3 ect.). Tryed directx 7 and 8 and also the drivers for the graphics card are the most up to date.

11 replies

by chuckd2

Had same problem. Have the almost the exact same setup, but Radeon 32DDR and W2K. Never really figured out problem, but did a fresh install, and so far, no problems. What I do know is that I had setup Netmeeting, and installed some sharing software (Gnutella, Bear Share). Didn't install Bear Share, and reconfigured Netmeeting. Running smoothly for 4 weeks now.

by ice440

Uninstall the video card through the device manager. Remove and reinstall the drivers. Check with Nvida for all of the correct BIOS settings. Also make sure the fan in running smoothly and sitting directly on the video card. Use thermal grease if itis not. If it is running hot, this is the problem. Is this NT that you are running or 9X?

by richard_barsby

Hi one thing to check is the monitor type is set correctly. If the games are running a lower resolution to the windows desktop the vertical refresh maybe too high for your monitor.

Best of Luck

Rich

by stevendun

I've also come across this problem with a number of customers. apprently it has something to do with the graphic drivers conflicting with the directdraw in directx. At the moment the only suggestion I found that seems to work is to disable directdraw (but then you have to enable it to play DVD's). Its not a perfect solution though so I'm personally looking into this one. I've also heard that installing an older version of the driver works...have yet to try this.

Is it Windows ME?

This discussion is closed to new replies.