Discussion Locked

geforce and aureal au3380 sound card sha

0 helpful
16 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

sound card and video card are both assigned to the same IRQ...i cannot reassign resources thru device manager and there is no option other than basic configuration 0000 to try...both methods of irq reassignment i have found. BIOS (amibios on asus k7m athlon mobo) has no settings that appear to change these assignments either..

Does anyone know how i can change these resources - if i have to that is - only problems expirienced are in 3d games...sound and video work fine otherwise...

Any help would be well appreciated as this is a personal crisis - no TFC!!

athlon600
asus k7m
asus agp v6600 geforce sdr
aureal au8830 3d soundcard
192mb ram
etc...

16 replies

by eadwint

Somtimes there are methods of setting the IRQ actually on the hardware itself, check there are no jumper/switch seetting which can be altered to correct this.

by dmiles

You shoul have the option of changing the setting by choosing Control Panel-Settings,then double click on the System Icon,select the plus besides the device you want to change,in the sub-tre,highlight the device and then click on the properties button,click on the resources tab and uncheck the automatic settings box now you have the option of setting the IRQ manually.
Hope this helps.

by ghandi the inept

this is what i'd already tried...tweak3d says that how it SHOULD work but as it didnt - that why my q here - thanks for the time tho

by lizzy

If the jumper switches and Resource tab in the control panel don't help you, I would uninstall the sound card, update the video drivers with the latest available from the web, reinstall the sound card and update its drivers also. This may resolve the conflicting IRQ's in the process and remove any other possible driver problems in the process. Good luck.

by tchieng

Try to free up another IRQ by eliminating the secondary chanel IDE controller or the USB controller if you're not using them. Then go to the device manager and remove both of the devices and reboot. Allow the computer to redetect them and re-installthe drivers. You might be lucky enough that one will use the other freed IRQ.

Hope that works. If not, there is a option in the BIOS that tells the computer if a Plug 'n Play operating system is installed. Turn it off if it's on. Then try answer #2.

If that doesn't work, then good luck.

by gremlintrm

Hi,

If you have the Soundcard in PCI1 (next to the AGP slot), move it and leave it free.

A lot of GFX cards require their own IRQ to
work properly, especially those with capture
features.

In order to force your PCI card to use a differentIRQ, you should check the MB handbook/online FAQ etc. for details on
changing your BIOS settings.

CU,
Glenn

by ghandi the inept

this is the answer....thanks m8
i swapped the slots so sound card not next to vid and now they don't share IRQs
thankyou m8

by kevin.reed

Try the sound card in any PCI slot apart from the 1st one as this tends to share IRQ with AGP slot.
Try enabling "Assign IRQ to VGA" in the BIOS.

by waifoon

You mentioned no option other than basic configuration 0000. This is automatically assigned by the system. Did you try to uncheck the Use Automatic Settings? Once you have done that, you can manually click on the IRQ to change the IRQ number.

by ghandi the inept

cheers - unchecking the box and trying to alter irq from there just lead to msg - you are not allowed to reassign this resource...

by fiction12

Everyone's giving some good tips but here is a simple one. Go into your bios, in PCI PnP setup you should be able to assign IRQ's to PCI slot's. All you have to do is figure out what slot the devices are in and assign the IRQ you wish to use. Work's9 out of 10 times.. :-)

by ghandi the inept

i already tried the bios and didnt appear to be this option...but hey ...after all im a bit inept at all this ... thanks all for the help

This discussion is closed to new replies.