Discussion Locked

Generic Monitor Driver

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I bought a generic 17" monitor that doesn't have a name. The model # is DH-1764 and the company looks like RIC on 3225 Laurleview Ct. in Freemont, CA. I cant get the monitor to size to 600x800 or display more than 16 colors. My motherboard has a built in graphics adapter it looks like.

Any thoughts,

Peter

17 replies

by dmiles

In the control panel click and click on the system icon,click on device manager tab locate the monitor in list and then click the plus right click the monitor that displays and when the screen come up click to update the driver.

by clover252525

When you coldboot your computer, the very first thing is usually the graphics adapter in your system. Try to read what it says with a finger hovering over the "pause" button. Set that adapter in control panel.

If your on-board adapter has 4MB or more video memory, setting the adapter to "standard VGA" should enable you to have 16 million colors anyway.

clover

by ec364

Your display driver needs to be updated. Obtain an updated driver from the PC manufacturer's site. Remove the driver from the "Device Manager" and restart Windows. Windows will automatically detect the display adapter. Click "Other Location" for thedisplay driver and supply the source path. Restart the PC.

Enjoy!

by johnnow

When I don't have the name of manufacturer. The first place I start with is to locate the FCC id number. You can key this number at http://www.fcc.gov/oet/fccid. This will bring up the name of the manufacturer. From this point you can go to their site or site up at http://www.driverguide.com which has a driver out their for just about everything PC. Once you find your driver then follow Proposed Answer 3 and you be ready to go.

by compzone9

Your monitor driver files are useless unless you can first get windows to use the standard VGA adapter in device manager. If you can't load the right drivers for your video card, you will never get your monitor to work the way you want. As always in windows when things don't work well or something "else" was chosen by windows during installation for your hardware, remove it in device manager and reboot. If it doesn't work, you need to find the type of video you have (the number on the big video chip or a logo like S3, Cirrus, etc.) and then find the right drivers. I have found that onboard video is the hardest to get up and running but you should have gotten the drivers for it with your motherboard if it has onboard video. If nothing else works, disable onboard video, plug in a different video card. Most boards will disable onboard video when a video card is plugged in but check bios setting when restarting after new card is in.

by fred_e944

I don't think the monitor's the problem. Sounds like your video display doesn't have the correct drivers, and is defaulting to 16-color, 640x480 VGA. Check Display Properties in Device Manager. The Drivers tab lets you select "Update Drivers" andinstall drivers (the most current ones from the WebSite of the Manufacturer of the motherboard)

by tracer

In addition to what everyone else said, you might check the BIOS to see if your default graphics adapter is set to PCI or Onboard. I think it's AMIBIOS that has this option...

This discussion is closed to new replies.