Discussion Locked

Getting D-Link to work with Win NT WKS

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an Acer laptop with a D-Link DFE660 PCMICA card. I installed the drivers and NT is telling me that they are installed ok. When I click on the PCMICA icon it is telling me that there is no device installed on the computer. When I reboot the computer with the card installed, the computer freezes on the CTRL ALT DEL screen. I can boot the computer without the card installed. I know the card is working as I just had Win 98 installed and working. When I click on devices the PCMICA card was disabled, I set it to auto and still no response.
Can anyone help as I need to have NT installed on this laptop and out the door very soon. Thankyou for your help!

8 replies

by zchris

hi kerry!
i had the same problem.
i'm sorry to say but there was no solution.
degrade to win98 or throw your nic.
(i throwed both, the laptop and the pc-card)

by kerry.howard

Sorry I cannot give it away there has to be a way. I have to run software that is only compatable with NT and need to have a portable computer to use it.

by cavedweller

D-link has an NT-4 driver available at http://support.dlink.com/downloads.asp. This driver apears to be for the newer DFE-660TX card. A driver for the older DFE-660 is available on their ftp site ftp://ftp2.dlink.com/NIC/ but it looks like it onlycovers win-me. There is also an alternate driver and readme file for NT-4 if your DFE-660 is actually the newer DFE-660TX.

Try switching your BIOS settings for OS sets up pcmcia/bios sets up pcmcia. This has worked for me in the past.

by kerry.howard

Thankyou for this. I already have these drivers but the laptop will not let me install them as it cannot find the PCMICA Controller.
There are no BIOS settings for the PCMICA card that I can find. I know that the device and drivers work as I have had Win98 installed with no problems.
I have reinstalled WinNT with the same error.

This discussion is closed to new replies.