7 replies
by mikevinda Accepted solution
by seanferd Accepted solution
I would suggest Cisco CCNA or something rather than MS certification. But you could probably pass cert tests just by studying, no experience necessary. (That is actually one of the complaints about certs, but it can be an upside for those looking to break in to a new line of work.)
I'd start by looking at security blogs and websites, and focus in on the ones that have network security as their focus, further refining for the type of network administration and security that you are interested in. Of course, it does help to have broad knowledge anyway, but at first you should attend to the stuff that looks like it is in your area of interest. Find out what net security folks have on their CVs. Talk to some of the companies that do this work.
A lot of folks do this stuff with few or no certs whatsoever, but they've already built up experience.
I'll leave the rest to those much more knowledgeable than I. Good luck! :)
by mikevinda Accepted solution
Hi Seanferd,
Thanks for you response, I will take your suggestions into consideration. I do have one follow-up question if you don't mind. Are you saying that it is possible to take and pass the CCNA exam just by studying the exam prep books? Obviously, if I were to first find a job in the industry and get some experience it would help but someone could pass that exam without prior job experience?
Thanks again for your time.
by seanferd Accepted solution
A lot of MS stuff is passable if you get the official course books and/or prep books, but I think they are starting to make their higher level exams harder and more comprehensive. Cisco's stuff is generally more advanced and you'd need to learn IOS and their architecture, etc. You could get lucky and get experience with their stuff, otherwise, classes are the way to go.
I'm just thinking if you are more into the network security angle, Cisco may be the way to go for you. If you are more comfortable with MS systems, maybe you should just start with their testing. You can always go for lower certs first and work your way up. I'd say, whatever you think will you employed in a position you'd like the soonest. You can gain experience, get more certs if necessary, and go for a promotion or another job that's closer to what you really want to do.
Consider what size networks you are currently comfortable with, your familiarity with various operating systems and hardware, etc.
Actually, I'm surprised no one else has posted anything. There are plenty of people here who have a lot of experience with all things networked.
As for exams, get a coursebook from a school like ITT Tech or the local University (any that include "official courses") and have a look through it to see a general description of they're about. You'll get an idea of what to expect.
by jdclyde Accepted solution
CCNA is entry level and will get you help desk jobs.
There are many ways to get this, one is attend a Cisco Acadamy. 4 classes (one year) for CCNA and 4 more for CCNP (another year).
You can go to any major book store and just buy the books. You will find a box set, around $200, for each level. If you can learn from books without someone holding your hand (instructor) you will get the same information.
You will need to have hands-on. There are e-simulators that will give you a virtual lab to work on, and you can't tell that you are not logged into a real router. Another way is to hit ebay and buy old routers and build a real lab.
As for work, IF you can get a job in the field WHILE you are learning, this is the best, because you can apply what you are learning and it will make more sense.
Education is used instead of experience by many, but it leaves people short. Going for both will make you a well rounded tech.
by seanferd Accepted solution
by mikevinda Accepted solution
This discussion is closed to new replies.
Trending IT Employment posts
Sort by Trending