9 replies
by jwm5150
The the first two errors are associated with no response on the VPN box. The 720 is looking for certificates. The first thing you might wnat to try is going into the PPTP properties and making sure you're not using IPSEC or are trying to connect viaL2TP. Try straight PPTP first.
Next, if you are behind a router and have a 3Com 3c905 series NIC, go in to the NIC properties, into the advanced tab and disable both Checksums. I hope this helps.
Jim Miller
by cicio777
by jwm5150
The the first two errors are associated with no response on the VPN box. The 720 is looking for certificates. The first thing you might wnat to try is going into the PPTP properties and making sure you're not using IPSEC or are trying to connect viaL2TP. Try straight PPTP first.
Next, if you are behind a router and have a 3Com 3c905 series NIC, go in to the NIC properties, into the advanced tab and disable both Checksums. I hope this helps.
Jim Miller
by cicio777
by oridjinn
If you want the easiest solution...
Use the Windows 2000 machine "Connection Manager Administration Kit" to create the VPN connection. You can even specify an icon file and a background file for the connection. We utilized this utility with ourcompany logo as the background and a smaller version of the logo for the icon. Just save the files to a floppy disk and have each user run setup from the floppy. The disk will install all components and will even prompt the user to install the VPN connection in the networking protocols for them. All they have to do then is enter their username, password, and domain after they have dialed up to their ISP and it will use the provided IP address for the connection.
Hope this helps.
by cicio777
by gerard.meij
you ";ll have to make an extra dialup connection to your VPN server and Install
the VPN service ( in network neighbourhood
properties , add servive MIcrosoft service
Or protocol ( I am not sure) and add VPN
both are needed to connect to your
companies VPN server
You'll will have a connection needed for you
ISP and the connect to yoor comnpanbies
VPN server ( your system admin should have
dial up networking enabled for your NT account or it won't work) good luck
by cicio777
by cicio777
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending