Discussion Locked

Getting windows 2000 server to add these

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How do I add these ip addresses so windows 2000 will recgonize them?

192.168.0.0 - 192.168.255.255
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255

Also, how do I get ssl working in IIS 5.0 I am using Windows 2000 server. I installed a "test cert" one I generated. It looks like everything is working, but when go to https:/pavilion, or even https://localhost, it doesnt show anything. Just a cannot connect to server error.

What Do I do?

5 replies

by dmiles

Configure the dhcp to obtain the TCP/IP configuration settings.The DHCP runs as a service after being installed through the Local Area Connections Properties page or through Add/Remove Programs in control panel.
A DHCP server cannot itself use DHCPto obtain its own TCP/IP configuration from another DHCP server.the settings must be done manually,by creating scopes and then assigning properties to them.

by drakir40

Default in windows 95 98 2000 obtain automatic tcp/ip settings from DHCP usually this does not have to be changed only in the case your ISP requires it. The subnet mask usually sets itself like this 255.255.255.0
In case of software/hardware erroryou can verify the integrity by typing ipconfig /all | more - in the command prompt.
To verify that the IP address is working and configured correctly for your adaptor type ping 127.0.0.1 in the command prompt.

This discussion is closed to new replies.