Discussion Locked

GIGABYTE GA965P-S3REV3.3 ON RAID

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm having issues with this curret raid 1 set up.I'm trying a fresh win xppro install on a raid 1 config using 2 seagate barracudas.I get pass win partition blabla bla,but then following a get this message set up can not copy j.raid.sys and 4 more miles pertaining to the sata controler.I have tried using all af the files on the floply GBB360,GBB362,GBB363,GBB366 AND THEY ALL FAILED TO COPY.I got these files from gygabytes website since the ones on the cd dont even work .ANY IDEA...

5 replies

by absolutely

I'm not completely sure, but it sounds like you're loading drivers from a CD, while installing Windows, and I'm guessing that the reference to a second CD is hosing the install process. Most driver disks have folders, with the Windows version as the folder name. Copy the .inf file from the 'XP' folder onto a floppy. You can also try this:
http://articles.techrepublic.com.com/5100-10877-6150784.html

by hal 9000

You'll need to copy them to the Root of a Floppy meaning [b]No Folders![/b]

So that they are readable. The XP Installer needs these drivers at the Root of the A Drive to install them properly.

Col

by banichulo

Thank you Hal.I understand ,this i know there can't be any folders .I'M able to read the files from the flopply fine.Im guessing the files are corrupt.

by donaldcoe

Why are you trying to install your OS onto a RAID array? I believe all RAID drives should be jumpered as Master that being the point, the system can not relate to more than 1 master. The other question have the identical drives been formatted by the raid array? Raids work best as storage or backups. I have setup both Gigabyte and MSI raid controllers and they work well following the rules.

by absolutely

And some software-emulating RAID1 setups require that mirror drives be slave. Anyway, he seems to have the RAID array itself set up fine, and his problem is getting Windows to address this functioning array, not in setting it up. The easiest way to do so may be to install Windows on a single hard drive, then install the RAID drivers to the working installation of Windows, then create a backup of the OS hard drive, then "restore" that backup image onto the RAID array.

This discussion is closed to new replies.