Discussion Locked

GW Server has critical error and reboots

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have Novell 4.1 and 2 servers in the tree. We also have 2 GroupWise servers (one at each location). Our main GW server has been popping a message to users that it received a critical error and will shut down in 2 minutes. Then it shuts down and reboots itself.

Does anyone know what could possibly be causing this? Both GW servers are running the internet agent, etc. The problem server is a new PC. Could it be that it doesn't like some driver or something with netware or GW is bumping headswith something else?

Our manager has rebuilt the GW on both servers from the top down and it still keeps shutting down.

Any suggestions? Thanks in advance...

6 replies

by tcelebi

You should change your IDE drivers. I had the same problem with Novell SBS. The PC had and UDMA-33 IDE interface it popping up messages like "Critical errors". Non UDMA IDE interfaces didnt have this problem.
So, it seems that you should look for abetter driver suitable for Novell.

by hixenbj

You may be close, but we don't use IDE on this server. We think we have it down to an NLM

by tbv

I've had the same problem. What I ended up doing was changing a Novell Netware setting Set--Error handling--Set Auto Restart After Abend. I changed the value to 0 (do not recover). You may also want to check your abend.log file. And lastly, there isa 2 part document at support.novell.com (search the knowledgebase on Groupwise Abends). As soon as I changed my setting to 0, the problem went away, and my server has been stable. Also for what it's worth, when it was doing the multiple abends, after about 3 it would fix itself (until the next time, and until I reset the parameter above). It's dumped once or twice since, but once shutdown and restarted it was fine.

by tbv

You may also want to check the service pack level on Netware and Groupwise to be sure you are at the latest. Tbv

by hixenbj

This may not be our problem (we think it may be an NLM), but your information was helpful in that I can research the documents you mentioned. Also, we have all service packs on the Netware and are currently working on the GroupWise one.

This discussion is closed to new replies.