19 replies
by deka_521364 Accepted solution
by tig2 Accepted solution
If you have your account details, they can assist you with your password needs.
We don't assist people with password cracking. Sorry.
by maniacman Accepted solution
by jplconsultant Accepted solution
I've never herded anything, much less hacked it after I herded it.
Gruesome.
by dmambo Accepted solution
by the scummy one Accepted solution
But I am sure that you arent going to do anything illegal with this info, as you work in a Legal profession. So, here is the crack
I just tested it and yes, it is still unpatched by MS (however, it does not work in FF).
To crack into a website and alter their data
Ok, you will need a few tools and an active Internet connection (the faster the better).
Establish a connection to the Internet
Browse to the website to be cracked (NOTE: This is an unpatched IE flaw, it fails in FireFox). Furthermore, IE has to be the default browser or it will fail as well.
Once at the proper web site, you will need to alter a system file. Open windows explorer and navigate to c:\Windows\System32\Drivers\Etc
find the file called 'hosts'
rename the file to hosts.txt
open the file. Look to where it states 127.0.0.1 localhost
to continue, get into a Dos shell, go to start -- run -- type CMD and press enter
a Dos shell window should open. You will need to use a few commands from this location in order to gain access. First, you need to know the IP address of the site. Type 'ping %domain name%' this will bring up the current opened website ip address.
Go back to hosts.txt and make a new entry under the 127.0.0.1 address. Keep everything lined up the same. Just as an example, lets say your ping came up with 1.2.3.4. In this case you would add the line
1.2.3.4 localhost
save the hosts.txt file
rename the hosts.txt file back to the original "hosts"
reboot
Ok, upon reboot, open the website again. Now since you are on the site, and your computer thinks the site resides locally (fooled IE) now you can alter it. However, you will need to give permissions (shared) in order to do what you want to. So, open explorer, and share your c: (right click on your c: and click share).
Ok from the dos shell, now type cd \\%share name%
now type deltree *.*
Since your computer thinks that it is the website, after a short time it will lock up, and does not want to reboot. So now we need to fix the problem. This gets a bit tricky, so follow closely. The smallest mistake can cost you big time (they can track you). And believe me, they will be looking to track for someone for taking their website down.
Now, to get your data back, their website is in a protected (locked) state. And remember, it is linked to your computer now, so you have complete control over it. So, now you need to 'get rough' with it. With the computer powered on, and hung (it is in locked mode as well). You will need a few pieces of HW for this now. Get some skoal (or other chewing tobacco), (this works best, but is not needed). Put a grounding wire in your mouth (the chew helps you to create spit), do not spit it out though. It also works best if you bare enough of the wire to tie it around your tongue. Put the other end of the grounding wire into the ground outlet in the wall socket.
Now to unlock Windows, and the website from 'locked' mode, make a small hole leading to your power supply, get an unsheilded small pipe, and jab it into this hole, making sure to short the PSU (power supply unit). this tells bot Windows and the website to get out of the protected mode. For best results, you should tie the pipe very closely (tight) in your palm, and use any kind of electrically cunductive gel (best connection).
Reboot and you can search their database completely logged in as you (if you want to log in at all), as you have 'stolen' their entire website, DB's, and everything else
by jaqui Accepted solution
by the scummy one Accepted solution
ifrom this in the future!
:^0
by jonathanpdx Accepted solution
by tig2 Accepted solution
You used to do that with Win95 and 98. I think that you did with ME, but I never supported ME. I think that the protocol changed with W2K.
Makes support a whole lot easier for those of us that can't aim!
by zlitocook Accepted solution
by older mycroft Accepted solution
You register with an email address - they send confirmation - which you then click on to activate ....I think.
How did you activate YOUR account if you didn't have any email capability?
Huh?
by older mycroft Accepted solution
by tig2 Accepted solution
by older mycroft Accepted solution
by jplconsultant Accepted solution
by the scummy one Accepted solution
by dmambo Accepted solution
by tony hopkinson Accepted solution
Crawl back under your stone..
Merry Xmas.
This discussion is closed to new replies.
Trending Social Networking Forum posts
Sort by Trending