11 replies
by nithy_chem33 Accepted solution
by prrethish Accepted solution
U didnt completed ur question
Plz clarify
what error u r getting in windows
by nithy_chem33 Accepted solution
by purpleskys Accepted solution
by oh smeg Accepted solution
I'm assuming that this is a new HDD so it needs to be Formatted to appear in My Computer in Windows.
To do this Open the Drive Management locate the new drive and move the Mouse Pointer over it. You should be greeted with a request to prepare the Drive for use so click on the Yes button and then follow the prompts.
If this is a SATA Drive connected to an existing Windows system without any SATA Drives already connected you'll need the SATA Driver for your OS and M'Board.
So if you bought a complete Name Brand System go tot he Makers Web Site and download the driver for SATA or Chip Set for your OS and install it. If it's a White Box go to the M'Boards Makers Web Site and get the same driver and install it. ;)
Col
by oldbaritone Accepted solution
Versions, drive size, hardware interface
Older versions of Windows have limitations on the size drive they can use. Perhaps yours is too large.
Early versions of Windows came out before some HDD controllers (e.g. SATA, SATA-II) were invented. Perhaps you must load additional drivers in order to get the OS to recognize the drive.
There are many possibilities. Without specifics, it is impossible to tell which difficulty you may have.
by prrethish Accepted solution
did u make partition & formatted u r new hdd
u can do it through disk managment
I dont know which windows u r using
by nexs Accepted solution
I love guessing games!
Oooh, oooh! It's an elephant.
by purpleskys Accepted solution
by nexs Accepted solution
by oldbaritone Accepted solution
It was definitely a Kumquat.
or was it an Eggplant?
;-)
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending