Discussion Locked

Hardware conflict?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an old computer that runs windows 98 and it has pentium 75 into it.
It used not to have a modem and then i started installing that in. When I slided
in the slot and the computer froze up when I turned that back on. Is that
due to the conflict between the hardware? And now,
the monitor is not even able to boot on for me to test it. Any sugestion, please?
Well, it worked perfectly before I put the modem in.
Thanks

4 replies

by chuckd2

you may want to check the modem specs. you didn't specify the modem speed. win modems have minimum processor speed requirements, and if those requirements are not met, your system can lock up. look into the hardware based modems. generally you can distinguish these by the price (lol), and a full size board.

by nhu27

well, yeah...you're right. That modem didn't meet the requirement of the old system, kind of fast speed...
What can I do if the system got locked up? (Eventhough I took the modem out already.)
Thanks for your advice...

by quest4

Pull out the modem card, you should be back to nornal. It sounds like you got an IRQ or an I/O confilict. If you can boot in the safe mode, with the card in that would be ideal, but probably not doable. At least record the IRQ's and the I/O's from System in the Control Panel. If you can find out the default setting of the modem card, you may be able to change one of the conficting settings, but be very, very careful when doing that, there are current ones that can't be changed. As a last resort, try an external modem.

by tecalote

I would think that there is a power problem if the system won't boot and there is nothing on the screen. You didn't mention, so I am assuming it failed the POST test?

Your second message implies the system still won't boot even after you removedthe modem. If that's true then following my line of thinking, you've fried something critical. I'd start by hoping to get away as cheaply as possible, reseat the memory, (SIMMs, DIMMs, etc.), then if you have spare components, replace the video card and the memory. If it still doesn't boot, I'd look at the CPU. (ouch)

This discussion is closed to new replies.