Windows Forum

Ask something
Discussion Locked

Hardware Issue.

0 helpful
2 replies

by asif_life

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need a support when i connect my system with Monitor and both get power but soon i started my CPU it generates two beeps and display nothing on the monitor as monitor gets power what i need to check in this regard? need Assistance.

2 replies

by thmiuatga

If you have an integrated graphics system then there is a problem with it and you will have to get a stand-alone graphics card. If you have a stand-alone graphics card then there is a problem with the card itself or it's not fully plugged into the board. Disconnect the monitor, power off and unplug the computer, open the case and unplug the graphics card from the motherboard AGP slot. Plug it back into the AGP slot and make sure it is firmly and completely seated in the slot. Secure the card's mounting bracket, close up the case, reconnect the monitor to the computer, reconnect the power supply and then turn the monitor and computer on again. If all goes well you should hear one single beep and get a display on the monitor.

This discussion is closed to new replies.