5 replies
by w2ktechman
have what is referred to as a multibay. A udb device which chas interchangeable parts such as floppy, HDD, cd/dvd drive, etc.
I would suspect the same for your tablet if nothing is built in.
Also, there may even be a built in SD cardreader or a combo cardreader.
by knobhead2
You didn't say what the OS was. There's lots of ways of getting the passwords sorted, but if you've trashed the file system - it could be just a little more difficult. I would suggest - assuming a 2.5" HD and XP or W2K, put the HD in a laptop, or a desktop with adaptor as primary or only drive, then run a Windows install, say no to repair. It will now detect any existing OS and ask if you want to repair it. Yes, but you'll need the CD keys etc. This won't necessarily get around the password thing. That can be solved with any number of utils like Acronis, password reset etc. When ready to put the HD back, check that the necessary drivers are available. Otherwise look at a utility by Qui Hong in conjunction with WXPE (by Bart et al) to inject drivers (used for injecting VMscsi drivers into VMs when they fail P2V) Otherwise consider going through the sysprep route. Any Q's let me know and I'll try and help. Bear in mind Bart has some great utilities to fix things like this. :-)
Knobhead
use a utility such as Acronis to image a working tablet onto a USB drive and then restore that image onto the problem tablet. This seems to be the simplest way.
You could also get a USB CDROM and boot from it.
Even though they won't support it, they may be willing to tell you the Admin password. It's probably the same on all of your older tablets, so you're going to want it eventually anyway. If they won't tell you outright (because they probably use the same password on all their systems), ask them if you can bring it to them and have them change it for you.
While your at it, ask if they have the recovery or restore CDs / DVDs.
If you get really desperate, a local computer shop should be able to make an image of one of your working systems and transfer it to the defective one.
by bincarnato
Basically you can try getting the registry backups from the restore folder's most current snapshot. There are sevral ways off accomplishing that.
1. Use an external CD-ROM and XP CD or Ultimate Boot CD
2. Connect as a secondary drive on the PC you added it to when you got into the recovery console the first time.
3. Conect via USB external HD adapter to a working PC.
However you are able to do it, here is a link on how to do it from the MS KB. I would just copy the 5 orginal files to a temp directory, then replace them from the system restore point. The MS KB article gives steps on doing this from the recovery console but it can be done with explorer and the other methods I mentioned.
This discussion is closed to new replies.
Trending Tablets posts
Sort by Trending