9 replies
by diskaus
Well for starters i wold check the cmos settings and make sure that the HDD is recognised , then ( if your bios has this feature) go to auto detect hard drive ( or somethig to that effect) and see if the bios will pick it up ,(you might get a choiceof settins for you harddrive but depending on how it was setup is what you set the bios at) if it does , save and exit the setup and the system should reboot and with any luck it should work ,
see how you go with that , you may have to reload the o/s to fix the missing file though but you should be able to get to the C:\ though , good luck
by mapp84
install the hd in another pc with virus protection.
Copy the documents you need from your hd to the other.
Then you have to options. First put the hd back in the original pc and use a bootdisk with the fdisk command on it, when in dos type "fdisk/mbr") this should replace the master boot record.
option 2 is to fdisk and format the hd while it is still in the second pc.
It was probably a virus; in general unless you install something that you know in advance that will change a bootrecord or bios (new os, some antivirus, (the programs will tell you that you may receive such a warning) NEVER accept the change.
If you dont have a 2nd pc you will have to start from scratch, and loose all information that you had.
success.
Leopold
by mapp84
by blackcurrant
Hi
Sounds like a virus modified your boot sector. Placing it in another computer may not work because the boot sector needs to be read before the remainder of the drive can be accessed and you have said that you can't access your drive from a command prompt. If you have a startup disk made by, or that came with an anti-virus product you should insert it in your A: drive and boot from it. If the virus detection software does not detect a virus,make sure the virus definitions are up to date. You should be able to remove the virus and restore your boot sector. If this does not work try booting from a floppy that contains the version of Fdisk.exe that came with your installed operating system. Once the A:> prompt appears type:
FDISK /MBR
to replace the master boot record. Assuming the boot sector was the only part of your hard drive modified by the virus (or whatever it was), you should be able to access your drive from a command prompt. Remember though that the virus may still reside on the drive so continue to boot from a floppy or CD-ROM until you are sure that the virus has been removed otherwise the virus may spread to your floppy disks or reinfect your hard drive(s).
Good luck
by mapp84
by @lberto
I have the feeling that a virus changed your boot sector. first, go into your BIOS setup and make sure that your BIOS detects properly your hard disk. Then get a Norton Boot disk, if it detects the virus it will remove it and probably will help you to make your hdd bootable again. If not then I am afraid you won't be able to recover your old data, then you'll have to swap your hard disk and re-install the whole think. And make sure you get a good Antivirus with the latest virus definition files.
Please write me back if it doesn't work.
@lberto
alberto@pancarib.com
by mapp84
by mapp84
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending