Question Locked

Head scratcher. NIC on 2 laptops malfunction after accessing WAP setup me

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am a CE integrator. Yesterday while at a clients home working on programming a remote control I noticed that the WAP was malfunctioning. Because I had a little bit of trouble with this particular WAP previously, I called Netgear support and after an hour of drilling through boiler plate troubleshooting scripts the manufacturer issues an RMA. In the process of troubleshooting I connected my ACER laptop directly to the WAP to access the setup menus etc.... When I next tried to connect to the internet, the NIC behaved as if it were malfunctioning. I checked with my network specialist and even though could ping the card etc... he concluded that the NIC must have croaked. Today, I was back at the clients with a new WAP and a different laptop. I successfully configured the WAP but when I returned home, I no longer have internet access. When I run the command ipconfig /release, the error message reads "Media disconnected, unable to run this operation" or words to that effect.
All diagnostics point to the card being in good working order but my experience (inability to connect to the internet) would suggest otherwise. I know just enough to be dangerous (plug and pray). Thoughts and suggestions appreciated.

4 replies

by robo_dev

Download a Linux live ISO like Ubuntu, burn it to CD or USB flash drive, boot it and run it on the laptop. If it works fine, you've got a Windows problem, if not, it's hardware.

Is it possible that you got a virus infection from the customer site? Some viruses/malware do nasty things to the TCP/IP stack on the PC...that might explain why multiple laptops are having a problem.

by simmonsdf

I considered that but for much of the time I was working on the WAP with the first laptop, it was disconnected. I discovered that I had shut off DHCP in the properties menu of my connection. But on the second lap I am certain I did not do that. I am going to drill down in there and see how that is set.
First laptop all set, second laptop not sure yet.

by robo_dev

Vista, IMHO, can be really cranky when you change from a DHCP to static address.

The 'repair' tab does seem to work for me, most of the time, however.

This discussion is closed to new replies.