Discussion Locked

Hibernate/Standby Problems on WinXP Home

0 helpful
39 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My setup is an Evesham Evolution 2800 Blue Lightning containing a Pentium 4 3GHz, 1GB DDR RAM, 120GB Hard Drive, Radeon 9600 256Mb VGA/DVI-I/TV-out and 17" Viewsonic VP171S DVI plus Optical Drives. I am running Win XP Home SP2.

It was not until I had had the machine for several months that I attempted to put it into Standby or Hibernate. By then I had done a huge amount of work setting the machine up as I want it including partitioning the hard drive using Partition Magic and loading numerous programs.

The machine goes into both Hibernate and Standby OK, but it will not wake up correctly. The fans come back on but the monitor does not so I cannot do anything but a hard close down. The monitor flashes briefly to say 'No Signal' and then switches off. I have tried it with the analogue cable rather than the digital cable but the same thing happens.

Evesham will not look at the problem unless I have tried a full System Restore first. I am most reluctant to do that as there is no Win XP CD - just a set of Restore CDs that wipe the hard drive first.

I have updated the video driver in case that was the problem but to no avail. Can anyone suggest what else I could try to solve this problem.

39 replies

by oz_media

I would look at the power management settings in the BIOS.

Are you using the Viewsonic driver or the generic monitor driver?

Also you may want to make sure you have all the latest updates for your BIOS too.
http://www.evesham.com/Support/article.asp?e=BE1ACEC9-2F17-415E-9097-A1C34F8E2AB4

If there is no visible setting on the cards device manager, it is most likely BIOS or power management related. The card sounds like it is actually powering right off, and not switching on, thus the no signal on the monitor.

Isn't it marvelous when OEM level1 techs think reformatting is an option?

I know an IBM tech that was let go on the spot for havingsomeone reformat without passing it to tier 2 or 3 support first. In fact the service manager said they are allowed to ask people to reformat period at tier1 support.

No wonder entry level help desk jobs don't pay anything these days, most don't help anyone either.

by glyall

set your Display properties >Monitor power >power schemes
Set Setting for Minimal Power management power scheme
Turn off monitor - never
Torn off hard disks - never
System standby - never

hope this helps
good luck

by medman

I have tried this, but it only affects whether or not my system automatically goes into Standby or Hibernation. That is not the problem. I want it to go into Standby. The problem is, it won't wake up again!

by medman

Oz_Media: I have tried both the Generic Driver and the ViewSonic Driver - the problem stays the same.

I am sure you are right when you say the video card is turning off OK but failing to wake back up. There could be other systems failing to wake up as well but without a screen I cannot tell!

I have followed up your link to Evesham but found nothing on my mother board - it is an Intel 865PE.

I will check the BIOS settings again and post another comment if I find anything.

by medman

The Power Management Features in my BIOS are set as follows:

ACPI Standby State S3/STR (Could be Auto or S1/POS)
Re-Call VGA BIOS at S3 Resuming Enabled
Power Management/APM Enabled
Suspend Time Out (minutes) Disabled
Power Button Function On/Off (Could be Suspend)
Restore on AC/Power Loss Last State

Set Monitor Events:
FDC/LPT/COM Ports Monitor
Primary Master IDE Monitor
Primary Slave IDE Ignore
Secondary Master IDE Monitor
Secondary Slave IDE Ignore

Set WakeUp Events:
USB Device WakeUp from S3 Enabled
Resume on PME# Enabled
Resume on RTC Alarm Disabled
Keyboard PowerOn Function Disabled
Mouse PowerOn Function Disabled

by nerd32768

something else that you may want to try is different memory. Hibernation and Standby save data from RAM to the page file, so if you have offbrand or low quality ram, then you may have problems. Try using Crucial or Kingston memory to see if that is the problems. If you order memory from www.newegg.com, you can try out the memory, and if it doesn't work, then you can get a no-questions-asked RMA immediatly, and not be at any loss.

by medman

I hope you are not right. I have paid good money to Evesham and I would be very annoyed if the problem was caused in this way.

by sureshtech_aagac

Hello I have the problem in XP
Plz install windows XP Service Pack 2
This may solve ur problem because it contains a patch solving this problem

by medman

I already have SP2 as stated in my original question. It was a nice thought though!

by oz_media

In your BIOS both Keyboard and Mouse Wake is disabled.

Try enabling one or the other as a wake up device, it may not be waking the graphics card from the motherboard.

by medman

I got quite excited by this answer but, unfortunately, it has not worked. If I change the settings the grey box wakes up upon the keyboard or mouse action and the fans and hard disc can be heard, but the screen still sulks and refuses to come back on.

Thanks very much for trying - very much appreciated.

by oz_media

Did you install the new AVI control center?

Here's what ATI has to say about the problem:
__________________________________________________

This issue affects the following system configurations:

* ALL-IN-WONDER 9800 Series
* ALL-IN-WONDER 9700 Series
* RADEON 9800 Series
* RADEON 9700 Series
[b]* RADEON 9500 Series[/b]

Some users have reported that the system will fail to post, or the motherboard will beep with a video adapter error.

This issue does not affect all system combinations.

ATI Customer Care is actively investigating the reported issues.

If a BIOS update is not available for your motherboard, or if you continue to experience this issue after updating the BIOS, please contact ATI Customer Service with the following information:

* Your name
* Address (no P.O. Box numbers)
* Phone number
* Is the latest BIOS installed for the system?
* Has system BIOS defaults been applied?
* Is the power cable connected to the power supply?
* Does changing the power supply resolve the issue?
* Does the system post if the Power connector to the video card is not attached?
* Does the system power up with no monitor attached?
* Let us know of other devices attached to the system
* Does the card post in another system?
* The 102 Part Number of the affected graphics board

This issue is under investigation. There is no solution available at this time

INFO-BASE#4486

__________________________________________________

Here's the link: http://www.ati.com/support/infobase/4486.html
__________________________________________________

I am assuming that you are already using this driver:
http://tinyurl.com/5fkxd

ATI recommends installing thier Catalyst Control Panel, NOw included with the new driver files.

If this isn't it, you will most likely be encountering the problem noted above.
Good

by medman

Sorry to be so long coming back. I've been away for a few weeks.

I downloaded what was then the most up-to-date driver from ATI last September and that is what I have been using. I used your link and went to the site again and found that the driver had been updated once more so I downloaded that plus the Catylist Control Panel. When installed, the new driver made things worse in that my computer would no longer go into Standby, never mind come out of it. I tried installing Catalyst but it failed to load giving a .NET error. I have now rolled back to the previous driver. All pretty frustrating, but it does seem to show that the driver is the problem.

by marwanm2005

انا محتاج كتب فى تخصص الانترنت مجانا بالاضافة الى سى ديهات

by marianolteanu

I have exactly the same problem as you do in some situations, but I have a totally different configuration, except the OS
I have HP Pavilion zv5410us notebook (Athlon 64, nForce chipset, etc) with Windows XP Home Edition SP2. I also use Logitech Cordless DUO (keyboard & mouse) and sometimes Logitech Cordless Optical Mouse for Notebooks.

When I hibernate the computer with keyboard attached to the computer (USB port) and I wake it up, usually I get the behavior that you describe. Sometimes I can go in Standby and when it resumes, either everything works fine or the USB doesn't work (although phisically, the USB port is fine - the keyboard worked till windows booted). Sometimes the computer is really dead (except the hard drive - the led is flashing). If I restart it (retrying the wake up from hibernation), usually I have the problem described with the keyboard and mouse devices in USB ports.
(I don't know if should I expect the same behavior with Logitech Cordless Optical Mouse for Notebooks)

How do I avoid it: I remove all devices from USB before hibernating (it's a notebook, it's not big trouble in doing that). Usually works if I do that (I am not sure that the success rate is 100%).

What do I plan to do:
- upgrade to Windows XP Pro to see if I encounter the same problem
- disable power management for USB hub: http://support.microsoft.com/?kbid=315664 . I found a lot of similarity between the problem described on microsoft's site and my (our) problem

I am reluctant in applying the second solution - battery life.

So I suggest to see if you encounter the same behavior without having any usb devices when you hibernate (if it's possible).
Also, I suggest to follow the recomenations in http://support.microsoft.com/?kbid=315664

by medman

I tried disabling the power management for the USB hub but, unfortunately, it didn't help. Thanks for the thought.

by andreakbar

Have you tried turning off all Power management features via BIOS ?
I have the same problem as you in my company on several PC's (cheap local brand). Some of the motherboards power management settings are not compatible with Win XP especially sp2.
Of course there sometimes that this Hibernate/Standby problems sovles it self.And i never knew how it repaired itself...crumbs :p

by medman

If I turned them all off I wouldn't be able to go into Standby which is what I want to be able to do!

by jpadilla15

I the same issue. I'm using XP Pro SP2. Gigabyte GA-GPNXP-DUO with P4 650, 1Gig Cruical Balistix. I also have Nvidia 6600GT. It goes into sleep mode but does not come backup. When I wake it, fans and harddrives come up, light on optical mouse and keyboard come on. Video does not, and keyboard seems to also get locked up, cant turn on/off cap/num lock. I just put this system together and have installed up to date drivers/software.

by medman

Let me know if you find a solution. It sounds like a similar problem to mine

by mszeghy

I have exactly the same problem - the pc will not wake up from the standby or hibernation, though usb will, and fans and hard disk too. it is only the monitor, as far as I can say, that will not switch on. I have been very surprised to see that whenever I went to another country than France where I am staying, this problem instantly disappeared. I was in Greece, Slovakia and Brazil, and the hibernation/standby fonction worked perfectly. coming back to France, the problem reappears. If you have found a solution to this problem, please tell me. I have also been using linux - ubuntu on my computer, and the computer would perform the standby/hibernation without any difficulty.

by r.bakker

You're using two kinds of Energy control.
the first is your BIOS , the second is Windows native Energy control. One of the two should be switched off. Reason: the two don't work together that well. Preferable is to have Windows itself controlling your Energy, so switch of the energy in the BIOS and open the energy applet in the Contol panel.

by spruett2005-techrepublic

I have the same thing happen only I have some more clues to the problem. I have a new Dell 4700 which was working fine. Then I added a SiliconImage 3112 RAID SATA card and 200GB hard disk to it. Everything worked fine. All I did with the extra drive was put data on it.

THEN:

I decided to remove the RAID controller and simply put the 200GB drive onto the other Dell SATA controller (alongside the C: drive controller).

NOW:

They system goes into standby fine but does exactly what yours does. It comes on but the monitor never gets to the login. IT will not come out of standby. It wakes up hardware-wise, but not software-wise it seems.

I can put the RAID controller back in and put the 200GB drive on it and everything will GO BACK TO NORMAL.

It's a good clue but I still haven't figured it out.

That page-file suggestion has me wondering.

by spruett2005-techrepublic

I scoured the MSFT knowledge base using the terms "resume from standby" which seems to be the words used for our condition. Check out Articles 895678 and 317272. The later being particularly interesting. I will try it later this week.

by medman

I have read through both articles, and quite a lot more, but cannot find my particular problem mentioned. Thanks for trying.

by dontaskjoe

This exact same thing started happening to me recently. When I wake from hibernate, everything powers up except the monitor. The monitor is powered during POST, but then goes into standby when it gets to the desktop. I know everything is there because I have an iFeel mouse and can feel the menus/buttons when I move the cursor.
I have a Radeon 9700 pro and a SyncMaster 213t connected by DVI. I fixed the problem by disabling the secondary display adapter in the device manager.
Hope that helps.

by medman

Your problem sounds very similar. Unfortunately, disabling the secondary display adaptor makes no difference to my setup. Thanks for the thought

by hal 9000

Well you have tried the obvious things as everyone has made the right suggestions.

What you should do to get around this problem which is related to SP 2 which probably needs to stay put is first Flash the BIOS to the Latest one available. You should need to reset the BIOS after this operation and when you are doing this disable any power saving options.

When you have the System up and running go into the Screen Saver and then Power and disable Hibernate. This way the HDD/s, Monitor and the important things will shut down but not the fans and the system should restart when any key is pressed or the mouse moved. XP Home has known problems with the Hibernate Option and should not be used as more times than not it just doesn't allow the system to wake up.

I know it's not what you want to hear but it is the only solution, particularly if there is no new BIOS available. You can have the option of having your computer Hibernate and not be able to restart it with out hard booting or you can just turn it off. The latter will save you money as there is nothing running and you still have to go through the startup process either way.

Col

by medman

I am really grateful for your suggestions, but unfortunately I still have the problem. I have done a flash update of the BIOS, disabled power saving options in the BIOS and disabled Hibernate in Windows. Nothing has changed. My machine will go into Standby but the screen will not wake up.

by hal 9000

Well then it sounds as if you have a hardware problem so this is where things are going to start to get nasty as the makers will not touch the problem unless you do a clean install from their Restore CD's.

The easiest way out of this would be to pick up another HDD the IDE ones are really cheap now days and do a clean install onto that HDD and just for the time being disconnect your original HDD with everything on it that you want and use the new HDD and see if it works properly.

From what I've seen it's cheaper to buy a new HDD that buying one on E-Bay as people just want too much for these or go crazy and will pay up to $3.00 less for a 20 GIG drive than what a 80 GIG drive costs new.

Anyway if the system comes out of standby OK on the Restore CD's then load up the Latest Window Patches and SP 2 if it isn't already installed if it still works properly start installing one program at a time until it stops and you've then found the culprit.

Of course if it doesn't work properly on a Clean install of XP it's then the makers problem to fix up and the same applies as well if a Windows Patch takes the machine out and prevents the unit coming out of Standby or Hibernation.

We seem to have exhausted all the other possibilities now with all the answers that have been posted here so I really think that we have to start looking at something to do with the Hardware. I know it's not what you want to hear but I really can not see another way out of this problem. Either there is something Hardware related or an installed program is causing this problem and the only way left now is to start off from a Clean Install and work forward until the problem emerges then we can start looking for a solution.

Col

by medman

As you say, it's not what I want to hear, but I'm sure you're right. Evesham have said just the same - I've done everything they can think of, but they won't send an engineer unless I have eliminated a software problem.

Thanks for all your help.

This discussion is closed to new replies.