Discussion Locked

Home 98 network - ICS no longer works

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I brought my parents a 2nd windows 98 computer and used a crossover cable to connect the 2. I installed a NIC in the host/first computer to do this. After many troubles and trials, finally got both computers seeing each other and on the network and even sharing the DSL internet connection (internal modem on host computer) for a couple days. Then, when I unplugged the crossover cable to put a longer one in, I didn't shut down the computers first, but did make sure that one wasn't actively trying to do something involving the other. After I put the new cable in, the network no longer worked, and rebooting didn't help. After trying everything again, double-checking IP settings and reinstalling ICS, I'm back to a working network with each computer able to browse shared folders on each other, etc. However, the ICS must not be working still. The internet works on the host computer, but not on the client computer. The host computer runs Norton Internet Security. We didn't have to do anything special with that to get it working the first time, but I still wonder if there's something in there I need to check. It still doesn't work even if I disable Internet Security. What am I missing?? Help! Quick!

17 replies

by sgt_shultz

it's gotta be the cable. are you getting link lights? try another crossover cable. unplugging it 'hot' shouldn't hurt anything...

by dana803

Did that, but did shut down computers this time, and suddenly the network wouldn't work again (and this was the cable that ICS was working on before). I plugged back in the longer cable, and I have my network working again, but no ICS. I can share files and printers, and I have lights on the NICs. If my cable wasn't working, I wouldn't be able to share resources on both computers.

by merrickcomp

Have you checked your Firewall settings? Try adding the IP address range of your home network in your trusted zones. If your computer was re-booted, it might have gotten a new IP address.

by dana803

Reinstalling windows 98 fixed it. Didn't even have to configure anything after doing it either. Wow.

by reallifeinuk

Foe ICS to work the host PC running the Internet must be distributing an Ip address. i.e.DHCP. Check that the ip address on the second pc is not static i.e dynamically asigned from the host. To do this right click on NETWORK NEIGHBOURHOOD choose properties and look at the network configuration. Make sure that the host is up and running before the 2nd PC logs on.

by dana803

Tried both static and dynamic, etc. Reinstalling windows 98 fixed it. Didn't even have to configure anything after doing it either. Wow.

by lwd86

Go into Norton Internet Security and put the ip addresses in a trusted zone.

by dana803

Tried that. Reinstalling windows 98 fixed it. Didn't even have to configure anything after doing it either. Wow.

by rohit kumar d

check the ip onboth the systems
the host ip will be 192.168.0.1
make the second system ip as 192.168.0.2
try pinging each other
if it pings i may not be able to help u
but if it doesn't remove norton internet security
it will surely work

by dana803

All set up that way, and they can ping each other. The ICS worked after reinstalling Windows 98. Didn't even have to configure anything after doing it either. Wow.

by jaxm4

Remove ICS and dialup from the main computer. Re-Boot and install them again.

by dana803

Still didn't work after doing that a million times. Reinstalling windows 98 fixed it. Didn't even have to configure anything after doing it either. Wow.

by wlbowers

Best Buy currently has a dlink router on sale with a rebate. Cost after rebate is $19 and change.

You can dump ICS. You won't have to have both computers running to surf the web.

Lee

by dana803

Router wasn't an option because the modem is internal to the host computer. I'm trying to get my Dad to replace the modem with an external one so he CAN use a router. Reinstalling windows 98 fixed the ICS. Didn't even have to configure anything after doing it either. Wow.

by jgruhler

ICS can only be installed succesfully if your LAN + WAN connections are already functioning. Do the following in order.
strip out all of the current connections on both machines including ICS.
restart both,
reestablish the WAN connection on the host,
reestablish the LAN connection between the Host and Client,
reinstall ICS.
Make sure all connections are set to DHCP.

by dana803

Still didn't work after doing that. Reinstalling windows 98 fixed it. Didn't even have to configure anything after doing it either. Wow.

This discussion is closed to new replies.