9 replies
by techrepublic
Best method would be to buy a network card for each of your PCs (PCI 10/100 card) and one for your laptop (PCMCIA 10/100), and connect them to a 10/100 Switching hub.
with RJ45 Cat 5 Cables.(If cost is a real problem, you can go for 10mb only cards& Hub)
Network the PCs using TCP/IP, and install a program like IPROXY (which is linked on my webby) on your Main Desktop PC. Setup your laptops' (and other desktops') browser to point to the IP address of the Main desktop pc, at the port stated in the IPROXY docs (6588 I think) and you're away!
This only works if the Main Desktop PC is switched on, of course.
IPROXY has a link on www.rygar.co.uk under USeful Progs. You can also find basic documents to set up TCP/IP with your network cards.
Rough costing:-
?10-15/$10-15 for Network Cards for PCI slots.
?20-30/$20-30 for Network Cards for PCMCIA slot.
?35-45/$35-45 for an 5 port 10/100Mb Hub
Cables - should be around ?0.50/$0.50 per M.
Hope this helps. ( and my webby is of use! )
The benefits of a network is that it allows you to share files/folders and printers/other devices, as well as your modem, and not just the modem. :)
by joserey
Got it! However, I wished the costs were really closer to what you posted. I got the NICs down here for about $22 a piece. Good thing the laptop came with its own. Then I got a hub for about $57. The cables were about $3/m.
Everything's online now.Chunky's corner was a big help too. Tnx.
by zaphodtwin
The best way to buy one of internal 100/10Base-T hubs (with up to 5 nodes would be connected) to be installed into one of your PCs (it already has one NIC (network adapter), then install 100/10NIC to other desktop, and PC-Card (PCMCIA-Card) format NIC into your portable PC (notebook); then you need to upgrade your Windows to Win98SE/ME which support Internet Connection Sharing and - Help Yourself with ALL this iNET!!!
Good Luck & Have a Nice Connects!!!
by joserey
by baltras
Me and my room mate have very similar situation.We have two PC with 10BaseT ethernet NIC and one dialup modem.We using very cheap solution because one PC acting as proxy for connection to Inet and another is connected to proxy via ethernet crossovercable.so we dont need to spend on hub !!!
the only one problem is that we can't connect third PC because we dont have spare NIC's. one possible way is to install aditional NIC into proxy or when notebook needs inet simply to disconnect second PC and plug etnernet crossover into notebook PC.
by joserey
by mckaytech
Personally, I like the 3Com products. Easy setup, built-in hub, throw in a couple of NICs and cables and you're up and running.
But they are not particularly cheap.
You can also use a regular hub and connection-sharing software (ICS in Win98SE or Win2K, Sygate, Wingate, etc.) at some savings in cost but some additional time spent in configuration. And, of course, if you have to reboot the machine with the modem, you lose your connections to all the machines.
paul
by joserey
by joserey
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending