18 replies
by dmiles
by gknicks71
by dlm
Do you already have the 2 '98 machines networked? If not, you will need a network card in each. and a small 5-port ehternet hub
set up a peer-to-peer network between the two machines using Client for microsoft networks, TCP/IP(and set to obtain IP's automatically) and NetBEUI protocols, and enable file and printer sharing. plug the router into the hub as well(you should have an RJ-45 connection on the back), then setup the cisco router to dhcp ip address to the workstations(you might have to refer to the documentation on this, some use a HTTP configuration, some use a program).
Once this is all going, setup your I.E. to connect through a LAN, and put in the routers IP number as your GATEWAY(TCP/IP properties) on both machines. I've donethis a handfull of times, so I know it will work, feel free to e-mail me, just in case I left something out.
Good Luck!
by gknicks71
by mckaytech
If your ISP has issued more than one IP, just plug the router into a hub and plug the computers into the same hub.
If (more likely) you just have one IP, there are a couple of options but probably the best and easiest would be to add a second NICcard to one of the computers (I assume there is already one NIC to go to the DSL router) and a first NIC to the other. Connect these two NICs either with a crossover cable or with a hub and regular cables. Install the NIC drivers and configure appropriately.
Share the Internet connection either by upgrading to Win98SE with Internet Connection Sharing built-in or download Sygate (www.sygate.com) and install it on the Win98 computer with the DSL connection.
A couple of minutes of configuration and you'll have accomplished what you want to do.
paul
by gknicks71
by calves
There is relatively cheap software that you can install and have many computer sharing the same connection.
Wingate - http://wingate.deerfield.com/
Winproxy - http://www.winproxy.com/
Some friends weren't very happy with WIN98SE, but as it was mentioned, it's an option.
good luck!
by gknicks71
by saihib
Since you're running Win98 this will cost you $20.00. Call Microsoft and order the Win98 SE Updates disk. You get Internet Connection Sharing, which in your situation makes the price right for that feature alone.
This way you can have both machinesconnected at the same time and be legal and happy. Of course I'm assuming that you have these two machines networked.
by gknicks71
by paul
Glen,
I would recommend using a DSL / cable router. It is pricy at $150 or so but my friend bought one for his house. It's sweet.
You can use DHCP on the router. It will assign your 2 systems internal ip address and you only need 1 connection.Check out www.linksys.com or
http://www.linksys.com/products/product.asp?prid=20&grid=5
If your a tech guy or want to rock in the tech business you should look at this. PLUS:
Once you use it you can try to setup other people or businesses with it. That way you can earn the cost of the router back.
Good luck, Paul
by gknicks71
by jkozura
The easiest way is to put a nic in each of the PC's and connect both of them and the router to a hub. Load Microsoft TCP/IP for each card in the network control panel. The PCs will need to be set up with static IP addresses in the same subnet as therouter's ethernet interface, or else you need to run DHCP from the router. (static IP example: router=192.168.0.1, PC1=192.168.0.2, PC3=192.168.0.3). Then you set the default gateway for each PC to the IP address of the router. That's basically it. Any IP based app should be able to contact the net from either PC. Don't forget to install ZoneAlarm (free from Zonelabs.com) or some other firewall if your Cisco router is not configured to block your erroneous ports, or someone will take over your machines.
John Kozura IV
IS Manager
AICPA/PDI
by gknicks71
by gknicks71
by brgraves
Easy solution. Each machine needs a NIC. If you have a hub connect both machines to hub. If no hub, use a cross over cat 5 cable to connect machines. Install Internet Connect Sharing (ICS) on the host (DSL) machine and follow the wizards. ICS isa scaled down DHCP model that allows multiple machines to surf the net at the same time.
Have several small networks doing this
If problems, Email
by gknicks71
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending