13 replies
by raticus
Here are some freeware sites with Floppy recovery software.
http://www.jufsoft.com/badcopy/floppy_recovery.asp
http://www.mjm.co.uk/floppy.html
http://datarecovery.altervista.org/zip_drive_data_recovery.html
http://www.fixdatarecovery.com/index.php?PHPSESSID=5235d00f92b3a627725bf73d5377a29c
http://www.quetek.com/download.htm
hope one of these helps... you can do what i did and just google it. Search for your topic...
by raticus
Poster rated this answer.
by sgt_shultz
by raticus
Os= win98se. Cannot scan disk as disk will not open, kept saying disk not formatted. which it is. thanks for trying
by cglrcng9
Problem is usually caused by removing the floppy after it has been accessed, but before closing the My Computer and/or Windows Explorer window(s) or document window(s) or not saving after editing the files.
The files were accessed & read, but not yet written back to & closed out (though floppy driver(s) errors can also come into play like your situation).
Scan Disk & Defrag of the affected disks usually helps as do those other data recovery utilities listed above. (Do make sure that the "Fix Errors" box is checked, and try both Standard and Advanced if it is a Win9x or 2K machine), if it is XP only you have chkdsk, chkdsk /r, or chkdsk /p though there are other extensions you can use (check out the KB article @ MS website...enter chkdsk in the search box when you get to the MS site for more info).
chkdsk can also be used via the Recovery Console on your Hard Drive though I have not tried it on a floppy (A:\Drive)from there so I can't tell you 1 way or the other.
Good Luck.
by cglrcng9
by cglrcng9
This will usually tell you how many boot sectors and files are still present on the disk and if it's worth going after the data too. IE; If there were 50 files and now there are 5. Ooop's, it may not be worth fooling with.
Does the disk just say it isn't formatted or what? Will the files open, or are they seen in My Computer A:\? Are they just gibberish when opened? Are you reading them w/ the proper program, and is the application that created them actually installed on that computer you are using to attempt to read them? IE: You created the file in Corel Word Perfect, reformatted your puter then switched to MS Office (or something else), and did not re-install your Corel Office (done properly those files can still be read via MS Word if set to translate into MS Word, and WP files can be created in Word 97 or higher). If done the other way a free MS Word, Excel, or PowerPoint viewer is avail. from MS to read, but not edit those files.
by raticus
See extra comment at top regards original problems.
Says disk not formatted, do you want to format. can see nothing unable to open disk to scandisk, AV check, etc... Tried open thru Word-prog I created files in. No luck says-A device attached to the system is not functioning.
by raticus
Use a track editor. HexworkShop has one built in found at
http://www.bpsoft.com/
by raticus
Havnt been able restore data yet, had to give up and get on with other work thanks for all the help from everyone though anyway. Thankyou :) .
by raticus
This discussion is closed to new replies.
Trending Desktop posts
Sort by Trending