Discussion Locked

How can I check my equipment ?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Dear friend,

I have tihs equipment :
1 - 2.4M antenna
2 - 2 watt HUGHES taransiver
3 - TRES Satellite modem
5 - BroadLogic DVB receiver
6 - Cisco 2610 router

and my internet link is through Telestar12 satellie

My station is in Tehranand this sat have 51 dbW in our city .

My provider(equipment & link) claims that with this equipment
and this satellite link
I can Send data up to 2Mbps .
How can I check his claim ?
Best Regard

5 replies

by a.c

The simplest answer is to upload/download some large files to a location that has good fast access, remembering that the internet is not an exclusive site, so is not going to have garunteed data rates. your best bet would be if you have a WWW site via you ISP, that link should be at the stated speed (as it should be the first point you get to before the internet)
If your ISP allows you, say, 50 Meg of web space, try uploading a 20Meg file, that should take about 80-90 seconds, if you say that the link runs at a maximum of 256K bytes per sec (which is the same as 2M bits per sec) you can reckon on about 1 meg ever 4 seconds (although there is always a bit of overhead in transmission and you should reckon on about 90-95% of maximum rate)That should be a good starting point, there are some debates about satalite based systems, that they do not always give the maximum data rate due to bandwidth sharing, but the same can be said for all tyoes of access as soon as you get away from your local ISP link.

A.C via a poor old 64kbps ISDN link :(

by mckaytech

If you go to www.dslreports.com, you will find several testing tools you can use.

If you want longer-term measurements, you could use a freeware program called MRTG to query the SNMP counters on your Cisco router and that could give you all kindsof information, including average speeds.

paul

This discussion is closed to new replies.