Discussion Locked

How Can I make a TFTP Server?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I learn in Cisco books that there is also a TFTP server which
can be provide Cisco boot image files.So how can I can create it.Please
help me.

5 replies

by barry hensley

I have used the TFTP servers indicated in the previous answer as well as others. They are very simple to install. You can run them on just about any platform, including Windows 95/98. You can download some shareware TFTP servers from www.download.com.

Here are some things to keep in mind.

TFTP is an unsecure protocol. It does not require a login. So, you must use other means to protect the files on this machine if security is an issue.

When setting up your TFTP server, you will want to create and speficy an upload directory and a download directory. These are the directories that are used to transfer files to and from the TFTP server. They can be the same directory.

When using a TFTP server to configure a Cisco router, or any other piece of equipment, you will need to make sure that the configuration file for the router is located in the proper directory on the TFTP server. Then, on the router, you will specify both the IP address of the TFTP server and the filename. Whenthe router boots, it will hunt for the TFTP server and download the config file. It's that simple.

This discussion is closed to new replies.