Question Locked

how do i get into safemode with WinXP Pro?

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I once read that you have to turn hybernation mode off in order to reboot into safemode. Tried this once and it worked, but only the first time, cant get into safemode again. Any other tricks?

19 replies

by thumbsup2

What you read is not true. You do not need to turn hybernation off to get into safe mode.

All you have to do, if it's running, is to restart. After it begins to start again, press the F8 key. If you're quick enough and get it pressed before Windows starts, it will come up with a menu asking you if you want to start in safe mode or normal mode (plus a few other choices).

The key to getting into safe mode is being quick enough to catch it before Windows starts.

by jdpowers41

I have done that. I have rebooted, and hit F8 before Windows starts, and all i get is a menu of 4 things to choose from, none of which say or suggest anything about safemode.
Only once during reboot, with the same steps, did it give me a different menu of 4 different ways to start up in safemode, and I cant get it to do that again. The one time it did, was when i coincidently turned hybernation mode off before rebooting. So, what am i doing wrong or just not doing?

by computercookie

I've tried to tell you this however, you didn't mention that the 'safe mode' option was not available.

I've only ever seen this in trojan infected computers, and yes I think it's clean but obviously it's not as OE will not work and the method to fix the problem doesn't work.

Lots of incorrect file associations as the registry is stuffed and not easy to fix, quicker to reload, your files are clean as these type of attacks do use your files.

Backup and reload is the quickest way, if this is not possible you will have to use the proper tools and post the results and wait for someone to point out the errors which you will need to delete, and it may go on for days!!

Post back if you have any specific questions!

Jeff

by lowryda

msconfig (at START,RUN), then the boot.ini tab and select the /SAFEBOOT and ok after rebooting the system should be in safemode.

by jdpowers41

once i do this, reboot into safemode, run my anti-virus and spyware programs, then go to reboot, will it reboot back to normal on its own? or do i have to go back into msconfig and unclick safeboot before or after i attempt to reboot? this is all new to me, so im a little nervous, but tired of this damn thing running so slow. I have hi-speed internet connection and it acts like i have dialup. thank for all your help and suggestions, much appreciated!

by magic alex

I've found among the unexperienced over the years that people often blame poor network performance on a crappy computer(especially dial-up users), while sometimes that is the case, most of the time even a crappy computer will browse the internet/download just as fast as a newer machine. A lot of these users have tons of programs load on start-up as well, can't tell you how many times i've seen MSN, Yahoo messenger, Lime-Wire, some sort of program that tells you the local weather, ICQ, etc. being loaded on start-up while the owner is sitting there complaining that it takes forever for the computer to start.../rant off

There are tons of reasons for a computer to have a slower than normal internet connection, to give a couple examples: poor wiring/line breaks, multiple programs running in the background eating up bandwidth (torrents/peer 2 peer file sharing programs are really bad for this especially if set to start on boot, limewire will do this by default).

by jdpowers41

downloaded and regularly run Avast, AVG, Spybot, Ad-Aware, CCleaner, and they all keep telling me my system is clean...so evidently I have one or more viruses / spyware that can only be cleaned via safemode which i cant get into.
Im not sure what you mean by backup and reload? Are you saying backup anything i dont want to lose, then dump everything and reload/start over? should i attempt to use msconfig to get into safemode at this point?
I have never done that before, is it safe?

by jdpowers41

I have a decent computer, even though it is only a P3 and a small 998mhz processor. It used to be very fast when new, of course. I dont have Lime-wire or anything like this downloaded. I use Yahoo messenger, but it is set to be loaded manually, not automatically at start-up. My computer only takes about 2-3 min to completely load. My problem is the time it takes for websites to open. So either I have programs running in the background that i dont know about slowing it down, or I have spyware/a virus that the cleaning programs I have arent finding. I have recently learned that i need to run these programs in safemode, so i am going to try this and see if there is any improvement. Thankyou everyone for your advice/input.

by boxfiddler Hot topic

Often a badly fragmented file system will slow things down like nuts. Weekly defrags are a good idea.

edit: this may or may not have any effect on you ability to access Safe Mode.

by older mycroft

Check that you are NOT destroying your speed-potential each time that you run CCleaner.

Make no mistake: In the greater scheme of things CCleaner is excellent. However, if you are experiencing any online slowdowns, you may be doing yourself no favours by removing you 'internet history' and/or removing your existing internet cookies.

Try unticking these categories before running a CCleaner scan.

by rob miners

is to add Safe Mode to the Boot Menu.

Start, Control Panel, System, Advanced, Startup and Recovery, Settings and System startup.
Select Edit

This is a sample for XP Pro
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect

Edit the original boot.ini (shown above) so it appears as shown below.

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional Safe" /fastdetect

by jdpowers41

this was the best info i received to answer my problem. now my computer gives me the choice in the beginning to either continue in regular or safemode before completely booting up. now i am able to easily get into safemode any time with no problem. thankyou very much True Blue for this info!

by hevans123

The way to tell if I am right is to click on Start, open Help & Support, find your help index and type in SAFE MODE.
It will no doubt tell you to do this:
Turn machine ON, then press F8 a couple of times and you will get a grey-looking menu. This menu gives you alternatives for starting your computer and you must select:
3. SAFE MODE

Select, hit enter and wait for it to begin in safe mode.

HINT: Safe mode is the best and quickest mode to do a defragmentation of your hard drive, because all the programs are not running in the background and interfering with the defrag function.

All the best.

Len

by computercookie

however, the original problem was that after recovering Jon couldn't run AV in safemode as the option was not available!

Make a note of some of the options listed especially the boot.ini edit, as you may find them very useful.

Jeff

by jdpowers41

this wasnt the best or easiest advice on how to get into safemode, but I thankyou for trying to help. however, you did give me some new and interesting advice on the best way to defrag, which i didnt know, and i thank you for that!

by rob miners

It saves looking for the CD later on and if anything does go wrong you have it at your finger tips. It will add itself to the Boot.ini and is accessable from the Start menu.

How to install the Windows Recovery Console

http://support.microsoft.com/kb/216417

This discussion is closed to new replies.