if you are using windows xp than in that case you can follow these steps
Starting from the desktop:
1. Go to My Computer > Control Panel
2. Double click on Network and Dial - Up Connections
3. You should see Local Area Connection or something similar. If you're not sure which network card you're using select each Local Area Connection(s) and follow step
4. Click Properties
5. You should have the following:
*Client for Microsoft Networks
*File and Printer Sharing for Microsoft Networks
*Internet Protocol (TCP/IP)
*NetBEUI
*IPx/SPx
If you don't have NetBEUI or IPx /SPx please go to Step 6, else please go to step 7
6. Next click Install and select the protocol that needs to be added:
NetBEUI
IPx/SPx Compatible Protocol
7. Click Close and Close again
8. This will bring you back to ?Control Panel?. Double click on System
9. This will bring up the "System Properties" Window, you'll be on the General Tab, click the Network Identification tab.
10. Click Properties
11. Check to be sure that the computer name you're using is a unque name on the network, and workgroup is set, not domain. Now make sure that this computer has the same Workgroup as the rest of the network.
Windows XP
To setup a network in Windows XP, you'll need to run the networking wizard in Windows XP you can access it by going to:
Start> Control Panel> Network Connections (If you do not see ?Network Connections? click on the Switch to Classic View option on the left hand side of Control Panel).
On the left side you'll see "Network Tasks"
Click on the option for Setup a Home or Small Office Network
This will bring you to a wizard.
Select the option for Connecting to Residential Gateway (That's the router).
Once the wizard is finished you'll have to make a floppy disk that you'll take around to the other computers to set them up. After you set them all up, shut down all the computers, and then start them up and you should be able to share files.
Please Note:
If you're using Windows 98/ME and try to access a Windows 2000/XP PC then you may not be able to access the shared portions of the Windows 2000/XP computer due to user right restrictions. To get around this you may want to have the Window 2000/XP PC access the files from the 98/ME machine. Else you'll need to setup User permissions.
For more information on that you can check Microsoft?s website or contact their technical support.