Discussion Locked

How do you bypass Netware Server startup

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What I need is to not run the autoexec.ncf. I have to get to a point in the boot process where I can edit the autoexec.ncf and take out a REM I put in which locks up the server completely. I know there is a key or key sequence you can use to force astep by step startup where I can bypass autoexec.bat. I just don't remember it for the life of me. I have a NW 4.2 for Small Business. I remmed out the "load dhcp" server statement which locks it up when the Rocketport NLMs try to load. Thanks folks.
Phil

8 replies

by robweir

Once at a DOS prompt, type server -na...This will prevent autoexec.ncf from loading. Also, you can use these commands:

-NL prevents the logo screen from displaying
-NS prevents both autoexec.ncf and startup.ncf from loading
-S specifies a different .ncf to execute.

Hope it helps.

by rbgnr111

the person that replied before me was partaly right
in you nwserver directory run
server.exe -ns to disable startup.ncf
server.exe -na disables the autoexec.ncf

you should be able to boot using server -na
then mount your sys volume and editthe autoexec.ncf

by swsmith

F5 bypasses autoexec.bat completely
F8 steps you through autoexec.bat

to bypass NetWare startup files...
server -na bypasses autoexec.ncf
server -ns bypasses startup.ncf
server -ndb starts without NDS loaded

hope this helps
Sterling

This discussion is closed to new replies.