Discussion Locked

How to change boot & shut down image?

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How or which files do I have to alter to change the img of the boot and shut down image of Windows95/08?

19 replies

by vagab0nd

Boot pic is logo.sys in Windows forlder. To replace it with custom image you need to create .bmp pic of proper size (800x600, etc.) and rename it to logo.sys
The shut down one I don't remember exactly but smth similar.

by phy

Windows uses three different files:
logo.sys displays while windows boots
logow.sys while computer is sutting down
logos.sys safe to turn off computer

The files are actually 320x400 Bitmap files (256 colours) just renamed to SYS.
Hope this helps!

by hdekken

This is an easy question. There is a possible logo.sys in c:\ (if not, windows uses a default somewhere I don't know)

Because I do not have a windows workstation present I dont know the exact names, but I think they were rlogo.sys ans wlogo.sys (search for *logo.sys and they will be visible)
They are in your windows folder.
I think there might be some programs (freewareor shareware you could find at the shareware part of http://www.winfiles.com

Good luck to you with yyour plans...

by bean baggins

There are 3 files involved: logo.sys, which if present, is found in your C: drive root directory and is the opening splash screen; logow.sys, found in C:\windows which is the 'Windows is shutting down' screen; and logos.sys, also in C:\windows, which is the 'It is now safe to turn off your computer' screen. If you open these in Paint, you'll see they are all exactly 129,080 bytes in size and 320 X 400 pixels at 256 color resolution. You can create your own, or modify the existing ones (but backthem up first. Logo.sys may not be present if you don't have the Plus. There are utilities for creating you own animated Logo.sys file from just about any image source. Go to www.winfiles.com, and check the graphics utilities section.

by drfox

ZDNet published a piece of software not so long back that allowed you to take greater control of these files.
Use the following link and search for logo
www.zdnet.com
Download Logo Swapper (ByteSoft) v3.2 Build 31 which is in the download section,
there may be more than this which are better but this is a free piece of software.

by mzy

These are the ones, and they are based that your windows installed hard disk drive is c:

c:\windows\logo.sys - Startup logo
c:\windows\logow.sys - Shut down (It is now safe to shut down your computer) logo
c:\windows\logos.sys - "Windows is shutting down" logo

Double-click on them to open them. Use Mspaint to open and edit any thing. Other ways include to replace it with other picutures, but make sure you make a backup of the original one in case you need them again. Just rename the file you want Windows to use as you logo into the respective .sys files.

Hope this answers your questions, Maozy

by mzy

Sorry for that, but I think I've got something wrong. It should be C:\logo.sys instead of C:\windows\logo.sys

by dragonnite

Windows 98 uses two different files:
logow.sys displays while windows boots
logos.sys safe to turn off computer

open them with MS Paint, MS Photo Editor, or any other paint/image pogram. The files are actually 320x400 Bitmap files (256 colours) just rename any .bmp to approate logo*.sys file. Have Fun.

by mm212

Most of the above are correct, but one important detail was missing.

C:\logo.sys -----> Start Up Image
C:\Windows\logow.sys -----> Please Wait
C:\Windows\logos.sys -----> Shut down

The files are up to 256 color, 320 wide X 400 high .bmp's which were originally 640 X 400, but then narrowed. If you place a normally proportioned image of 320X400, you will notice the picture is stretched on startup. Start with a .bmp that is 640 X 400, then resize it in a photo editor to be 320 X 400, rename it to logo.sys, logow.sys or logos.sys and place it in the appropriate place and you should be pleased with the result. And don't forget to back up your old one in case you want to go back.

This discussion is closed to new replies.