Discussion Locked

How to change IP address of a printer?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do you get a printer to change its IP address? I have used the Utilites that came with the printers to give them an IP address initially, but it doesn't work when I have to change that address (or even the names on the Macintosh's). It's almost like the address gets stuck on them. Thanks

9 replies

by mservino

A lot of modern printers have built in utilites once they are initially set up which can be accessed over a browser merely my typing in the existing IP address of the printer. Open up your favorite flavor for browsing, Netscape, Internet Exploder, whatever... type the IP address of the printer that you want to modify and with a little luck (assuming you're using relatively new equipment) you'll get some type of administration window opening up, It may require a user name and password, those I'm afraid I can't help you with, you'll have to get by them on your own. If you check out the website for the manufacturer of the printer they may be able to give you a default that might be set up initially at the factory.

Good luck,
-Mike

by robbi61

It would help greatly if there were more information about the printer that you were having the trouble with. Are you using HP printers with JetDirect cards? If so, then depending on the printer, some you can configure directly from the control panel. You go to the MIO menu for the slot the card is on and change the config IP to yes... it will continue to ask questions til you have it configured or select no. If your network is configured by DHCP and the card is set to be configured that way, then it will always select its own IP address. You will need to change the address from an administrative workstation, probably at the server. If you don't have a model that can be changed from the control panel ( older models do not have LCD displays) then you would need to use the JetAdmin software. Hope this helps. If not, leave more information, please.

This discussion is closed to new replies.