Question Locked

How to configure 2 routers 2 subnets with parent domain and child domain?

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am a Cisco Engineer and not a Windows Administrator. Jobs are difficult to find and this job is a life saver. I am having to learn a lot of new things. I really need help resolving the communication issues between Parent Domain and Child Domain. The company that I work for want to share resources to the extent of centralized management but NOT ISP or DHCP. I have two networks. Network A and Network B they are in two different buildings. I have them networked through a static route through fiber optics. I can ping between the networks with IP Addresses and I am having Name Resolution issues. What is it that I need to do the get the Windows to see each other so that the Name Resolution works for AD & DNS Updates.

Fiber Optics:
Router A: 192.168.1.1 255.255.255.254 to Router B: 192.168.1.2 255.255.255.254

Network A
ISP A
Router A: 10.0.0.1 255.255.254.0
Windows 2008 Server R2 - Parent Domain: cybersoftech.com
AD
DNS
DHCP: 10.0.0.1 - 10.0.3.254

Network B:
ISP B
Router B: 10.0.4.1 255.255.254.0
Windows 2008 Server R2 - Child Domain: cnc.cybersoftech.com
AD
DNS
DHCP: 10.0.4.1 - 10.0.5.254

2 replies

by netman1958

http://support.microsoft.com/?id=255248

This article was based on Server 2000 AD but applies to 2003 as well. I'm not sure about Server 2008 so if you are using it, you might need to google "server 2008 child domain DNS" or something similar. If you run into any trouble, post back and I'll try to help.

This discussion is closed to new replies.