Discussion Locked

How to disable NT Printer Notifications

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can I disable the printer notifications that popup on a users desktop? I've tried shutting them off with registry hacks at the users machine and I've tried shutting them off at the print server all to no avail.

14 replies

by rsears

There are a couple of things that you can try. First you must have access to the machine that the print server is hosted. With Server Manager you double click the machine that hosts the print server. From the server properties window click on the Alerts button, then remove the machine or username that is receiving the alerts from the list, by highlighting it then clicking on the Remove button.

Second solution: On the machine that hosts the print server, you could open the services manager and stop the Alerter service and make sure it is set to manual so that it does not restart the next time the machine is rebooted.

I think the first solution is the one to use if at all possible.

by mark_lt

on the Server that is sharing the print devices, go to the printers folder, then choose the first menu "file", select "server properties", go to "advanced" and de-select the tick box for printer notifications.

done

by singhjunk

With NT 4.0, you can modify these entries on the "Print Server" by using
Start / Settings / Printers / File / Server Properties / Advanced.

To do this via the Registry:

To prevent PopUp messages from appearing upon print job completion:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers
To prevent PopUp notification: add a value name of NetPopup, set REG_DWORD to 0. To prevent logging: Add VALUE: EventLog set Reg_DWORD to 0.

You will have to stop and restart the spooler from services in the Control Panel but you may wish to reboot.

If incase you are using Netware I mean to say If you are using CSNW or GSNW, use Control Panel / ... Services for Netware and clear the Notify when Printed check box (in Print Options). Clear the Print Banner check box to prevent banner pages from being printed.

Click OK to save your settings.

Hope that helps.

Thanks,
Jasjeet Singh

by calves

If you don't use the messenger for anything else, your can access the services applet in the control panel, double-click on messenger service, select manual, OK, then stop the service.

by rallynut

On the NT server that is your print server:

Start - Settings - Printers.

Once the Printers box comes up, click on File - Server Properties.

On the Print Server Properties dialog box, click the Advanced tab.

Uncheck the box labeled "Notify when remote documents are printed" and click OK.

That's it.

by wildmcp

The ONLY way to do this is on the server - even with Messenger service disabled, you still receive messages from the server. After you disable this from Settings, Printers - you have to reboot the server in order for this to take effect.

This discussion is closed to new replies.