27 replies
by dmiles
Open the printers window,then right click the printer you want to assign lpt2,select properties,select the details tab,there you should be able to assign and map to the port that you specify.
In case that it does not work,upon start-up click the delete button and then locate the port in the CMOS panel and change the port settings.
by techrep
by techrep
by techrep
by mphoffar
You may have to manually add in a LPT port using the add hardware wizard and also set the resources to match what you're setting in the bios. After that, you will have to either setup a new printer or go into the properties and point the port to LPT2 instead of LPT1 (which is usually chose as a default)
Of coarse I think the easier way would be to change the virtual port to LPT2 and leave the local on LPT1. That port should be local on the system and not effect anyone one else.
Mark
by techrep
by shawn.carney
by techrep
by burcjo
lpt2 to lpt2...
0x3BC
0x378
0x278
The possible addresses of LPT ports. When you boot the machine, Microsoft OS's assign the first port it finds as LPT1. No matter what address it has, the first port it finds becomes LPT1. In order for you to have an LPT2, you MUST have an LPT1. The way to San Jose is to purchase a cheap LPT card and install it into your machine as LPT2 and attach your local printer to that port. Then you can have your virtual lpt1 redirected as you please AND your lpt2 to print from locally.
John
by techrep
by techrep
by techrep
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending