24 replies
by dle
Boot with a Windows 98 boot diskette. Use FDISK to set up the partition on each drive. The 1st question after you run FDISK is "do you wish to enable large disk support", make sure to answer YES so that the drive will be using FAT32. Set up the larger HD as the primary partition and the other as an extended partition. Then format the drives.
If you don't want to reformat the drive again, try using a DOS version of Partition Magic. It will allow you to convert the partition to FAT32 and extend it to use the full disk.
by averytoledo
by tchieng
I could be wrong... but most likely you formatted your hard drive using the regular FAT file system. A FAT partition can only be up to 2 gig in size. If that is the case, you need to get a program like Partition Magic and convert that FAT system to a FAT32 system if you don't want to re-format your drives. Otherwise, re-formating is your only choice. If you choose to reformat... the first thing you need to do is create a boot disk. Go to Start | Settings | Control Panel | Add/Remove Programs | Startup Disk and Create Disk. Copy the FORMAT.COM and MSCDEX.EXE file from the C:\WINDOWS\COMMAND folder to that disk. Next, reboot your computer using the boot disk. Use FDISK and redo your partitions. When FDISK asks about using Large Disk support,enter Y. Create the new partitions (on both drives as needed). Reboot and format you hard drive(s).
Re-install Windows 98... If your computer is not capable of booting from the CD-ROM drive to install Windows, the boot disk should contain and load a generic ATA CD-RO
by averytoledo
by tchieng
Whoah... I thought nobody would be answering questions this late at night. I thought I was going to be the first one to respond... DLe, you beat me to the "Submit My Answer" button. :)
Anyway... continuation from above...
Use "A:\MSCDEX /D:MSCD001" to map the CD-ROM drive and proceed to install from there...
by averytoledo
by jesselou
by averytoledo
by dejan
sory 4 bad english
be sure to our madeboard recognize HDD > 8 GB, Pentium 1 is old madeboard. If necesseri and possible upgrade bios, then again build partition and format disk.
1. delete all partition
2. reboot
3. create partition, when fdisk ask "Enable Larg disk support" answer "Y" (this need 4 fat 32, in fat 16 max. part. size is 2 GB)
4. format and reinstall
by averytoledo
by tysonmathews
by averytoledo
by tysonmathews
Sorry not when formatting but when going into FDISK and gonna create the Partion.
FAT32 my friend. When formatting it will ask you, ould you like to use large disk support? SAY YES! that is your key to a large HDD if you select not hen your FAT16 or NTFS. That is the only way my friend. Unless you go NTFS with NT and then use a 3rd party partition proggy.
by averytoledo
by ec364
Your current partition is a FAT16 which is 2GB max. If you want to use the full 8GB without reformatting, use PARTITION MAGIC version 5.
Using Partition Magic, first you convert your FAT16 to FAT32. Then format the remaining 6GB. Then merge the first partition (2GB) with the second (6GB) and you will finish with 8GB. First, go get yourself Partition Magic. NOW!
It's guaranteed to work. I knew because I used it and I used it a lot for over 500 PCs.
by averytoledo
by kstv
by averytoledo
by itsibitsi
by averytoledo
by playdo
Use the drive converter in win 98 to convert to Fat32.You will find it in the system tools.If it is not there you'll have to install it by going to add/remove programs in the control panel, click the windows setup tab then select system tools,click on change and select drive converter.
Hope this wiil help you
by averytoledo
by bdivine
by averytoledo
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending